⚫ Cómo ARMAR UNA RUEDA DE Bicicleta Doble Pared ( Contra Pedal ) ✅

Introduction

In this tutorial, we will learn how to assemble a double-wall bicycle wheel using a Shimano coaster brake hub. This guide is perfect for beginners who want to understand the wheel-building process and gain hands-on experience. By the end of this tutorial, you'll have the knowledge to build a robust and reliable bicycle wheel.

Step 1: Gather Your Materials

Before starting, ensure you have all the necessary tools and materials:

• Wheel Components:

  • 26" double-wall rim (e.g., Foxter XR 4.20)
  • Shimano coaster brake hub (36 AG)
  • 36 spokes (2mm, 265mm length)

• Tools:

  • Spoke wrench
  • Rim tape
  • Tire levers
  • Hub assembly tool (if available)
  • Measuring tape

Step 2: Prepare the Hub and Rim

1. Inspect the Hub:

   • Ensure the hub is clean and free of debris.
   • Check that the bearings are lubricated for smooth rotation.

2. Prepare the Rim:

   • Clean the rim to remove any dirt or grease.
   • Apply rim tape to cover the spoke holes to prevent punctures.

Step 3: Lacing the Spokes

1. Identify the Pattern:

   • Use a 3-cross pattern for lacing spokes, which provides better strength and stability.

2. Lace the Spokes:

   • Start with one side of the hub.
   • Insert the first spoke through the hole in the hub, then through the rim.
   • Continue lacing the spokes, alternating sides and ensuring that each spoke crosses over the previous ones.

3. Secure the Spokes:

   • After all spokes are in place, hand-tighten each spoke.
   • Make sure to keep the tension even across all spokes to ensure a balanced wheel.

Step 4: Adjusting Tension and Trueing the Wheel

1. Initial Tightening:

   • Use the spoke wrench to tighten each spoke slightly, ensuring they are all at a similar tension.

2. True the Wheel:

   • Spin the wheel and observe any wobbles.
   • Adjust the spokes accordingly by tightening or loosening them to align the rim.

3. Final Check:

   • Repeat the truing process until the wheel spins evenly without wobbling.

Step 5: Final Assembly

1. Install the Tire:

   • Place the tire onto the rim using tire levers if necessary.
   • Ensure the tire is seated properly on both sides of the rim.

2. Inflate the Tire:

   • Inflate the tire to the recommended pressure indicated on the sidewall.

3. Install the Wheel:

   • Attach the wheel to the bicycle frame and check that it is secure.

Conclusion

You've successfully assembled a double-wall bicycle wheel with a coaster brake hub! This process not only enhances your bicycle maintenance skills but also deepens your understanding of bicycle mechanics. For further practice, consider assembling another wheel or exploring different lacing patterns and hub types. Happy cycling!