IndraWorks Ds – connect to IndraDrive via Ethernet

Introduction

This tutorial provides a step-by-step guide on how to connect to an IndraDrive via Ethernet using IndraWorks Ds software. IndraWorks Ds is a free tool by Bosch Rexroth designed for commissioning electric and hydraulic drive products. Understanding this connection process is essential for effective drive management and automation.

Step 1: Download IndraWorks Ds Software

• Visit the IndraWorks Engineering download page here.
• Choose to download the latest version of IndraWorks Ds, selecting either the version with online help or without.
• Follow the installation prompts to complete the setup on your computer.

Step 2: Prepare Your Ethernet Connection

• Ensure that your IndraDrive is powered on and properly set up.
• Connect an Ethernet cable from the IndraDrive to your computer or network switch.
• Confirm that the Ethernet connection is functioning properly by checking the cable and the network settings on your computer.

Step 3: Launch IndraWorks Ds Software

• Open the IndraWorks Ds application on your computer.
• Wait for the main interface to load, which may take a few moments.

Step 4: Configure the Ethernet Settings

• In the IndraWorks Ds interface, navigate to the network settings.
• Set the correct IP address for your IndraDrive. This can usually be found in the device manual.
• Ensure that your computer's network settings are in the same subnet as the IndraDrive to allow proper communication.

Step 5: Establish the Connection

• Once the Ethernet settings are configured, go to the device connection menu in IndraWorks Ds.
• Select the option to connect to a new device.
• Choose the IndraDrive from the list of available devices.
• Click on the connect button to establish the connection.

Step 6: Verify the Connection

• After connecting, check the status indicators in the IndraWorks Ds interface.
• Ensure that the software displays a successful connection message.
• If the connection fails, double-check the IP settings and physical connections.

Conclusion

You have successfully connected to an IndraDrive via Ethernet using IndraWorks Ds. This connection allows for efficient commissioning and monitoring of Bosch Rexroth drive products. For further learning, explore additional resources or tutorials on advanced features of IndraWorks Ds to enhance your drive management skills.