CARA SETTING WIFI MIKROTIK DAN ROUTER MIKROTIK

Introduction

This tutorial provides a step-by-step guide on how to set up Wi-Fi using MikroTik routers with Winbox. It aims to simplify the process, making it easy for users to configure their MikroTik devices efficiently. By following these steps, you will gain a solid understanding of how to establish a Wi-Fi network with MikroTik.

Step 1: Download and Install Winbox

• Visit the MikroTik official website to download Winbox.
• Install Winbox on your computer by following the installation prompts.

Step 2: Connect to Your MikroTik Router

• Open the Winbox application.
• Ensure your computer is connected to the MikroTik router via an Ethernet cable.
• In Winbox, look for your router in the "Neighbors" tab. It should display the router's MAC address and IP address.
• Click on the MAC address to connect. If prompted, enter the default username (usually "admin") and leave the password field empty.

Step 3: Configure Basic Settings

• Once logged in, navigate to the "System" menu and select "Identity."
• Change the identity to something meaningful (like your network name) for easier identification.
• Click "OK" to save the changes.

Step 4: Set Up the Wi-Fi Interface

• Go to the "Wireless" tab in the left-hand menu.
• Click on the "Interfaces" tab and select your wireless interface (usually named "wlan1").
• Enable the interface by checking the "Enable" box.

Step 5: Configure Wireless Settings

• With the wireless interface selected, modify the following settings:
  • Mode: Set to "ap bridge" for access point mode.
  • SSID: Enter your desired network name.
  • Frequency: Choose a frequency that avoids interference.
• Click "Apply" and then "OK" to save the settings.

Step 6: Set Up Security Protocols

• Still in the Wireless settings, click on the "Security Profiles" tab.
• Create a new security profile:
  • Name: Give it a recognizable name.
  • Authentication Types: Select WPA2-PSK.
  • WPA2 Pre-Shared Key: Enter a strong password.
• Click "Apply" and then "OK" to save the security profile.

Step 7: Configure DHCP Server (Optional)

• To allow devices to automatically receive an IP address:
  • Go to the "IP" menu and select "DHCP Server."
  • Click on "DHCP Setup" and follow the prompts to configure the DHCP server.
• Choose the interface that the DHCP server will use (typically the one you configured for Wi-Fi).

Conclusion

In this tutorial, we covered the essential steps to set up Wi-Fi on a MikroTik router using Winbox. You learned how to install Winbox, connect to your router, configure basic settings, set up your wireless interface, secure your network, and optionally configure a DHCP server.

For further learning, consider exploring advanced configurations such as setting up guest networks, traffic shaping, or VPN services on your MikroTik router. This will enhance your network's functionality and security.