2014-2018 Silverado 1500 Rough Country 2-Inch Front Leveling N3 Struts Review & Install

Introduction

This tutorial guides you through the installation of Rough Country 2-Inch Front Leveling N3 Struts on a 2014-2018 Chevrolet Silverado 1500. These struts not only enhance your truck's ride height but also improve ride quality and driving performance. With a straightforward bolt-on design, this installation can be completed with light to moderate mechanical skills.

Step 1: Gather Required Tools and Materials

Before starting the installation, ensure you have the following tools and materials on hand:

• Rough Country 2-Inch Front Leveling N3 Struts
• Socket set (including deep sockets)
• Wrenches
• Torque wrench
• Jack and jack stands
• Wheel chocks
• Safety glasses and gloves

Practical Tips

• Ensure your truck is parked on a flat surface.
• Use wheel chocks to prevent movement during the installation.

Step 2: Prepare the Vehicle

1. Lift the Front of the Truck

   • Use the jack to lift the front of the truck.
   • Secure it with jack stands for safety.

2. Remove Front Wheels

   • Use a socket wrench to remove the lug nuts and take off the front wheels.

Step 3: Remove the Factory Struts

1. Locate the Strut Assembly

   • Identify the strut assembly by following the connection from the wheel hub.

2. Disconnect the Strut

   • Remove the bolts connecting the strut to the steering knuckle.
   • Detach the upper strut mount bolts located at the top of the strut assembly.

3. Remove the Strut Assembly

   • Carefully pull out the factory strut from its mount.

Step 4: Install the Rough Country Struts

1. Prepare New Struts

   • Take the Rough Country struts out of the packaging.
   • Verify that the coils are pre-loaded and ready for installation.

2. Install New Struts

   • Position the new strut in place of the old one.
   • Insert the strut into the mount and secure it with the upper mount bolts.

3. Reconnect to Steering Knuckle

   • Attach the lower end of the strut to the steering knuckle using the provided bolts.

Step 5: Reassemble the Front End

1. Reinstall the Front Wheels

   • Place the front wheels back onto the vehicle.
   • Hand-tighten the lug nuts before lowering the truck.

2. Lower the Truck

   • Carefully remove the jack stands and lower the truck back to the ground.

3. Torque the Lug Nuts

   • Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications.

Conclusion

You have successfully installed the Rough Country 2-Inch Front Leveling N3 Struts on your Silverado 1500. This enhancement not only elevates your truck's appearance but also improves its handling and stability. For the best performance, consider getting a wheel alignment after the installation. Enjoy your improved ride quality!