How to Install a Wi-Fi + Bluetooth Card into your PC. (TP-Link AX3000 - Archer TX50E)

Introduction

In this tutorial, we will guide you through the process of installing the TP-Link AX3000 Archer TX50E Wi-Fi 6 and Bluetooth 5.0 PCIe adapter into your PC. This upgrade will provide you with faster internet speeds and improved connectivity for your Bluetooth devices, enhancing your overall computing experience.

Step 1: Gather Your Tools and Materials

Before starting the installation, ensure you have the following items on hand:

• TP-Link AX3000 Archer TX50E Wi-Fi + Bluetooth PCIe Adapter
• Screwdriver (typically a Phillips head)
• Anti-static wrist strap (optional but recommended)
• Your PC with an available PCIe slot

Step 2: Prepare Your PC

1. Power Off Your PC

   • Shut down your computer completely and unplug it from the power source.

2. Open the Case

   • Use the screwdriver to remove the screws securing the side panel of your PC case.
   • Carefully slide off or lift the panel to access the internal components.

3. Ground Yourself

   • If you have an anti-static wrist strap, put it on to prevent static electricity from damaging your PC components.
   • Alternatively, touch a metal part of the case to discharge any static.

Step 3: Locate the PCIe Slot

1. Identify the PCIe Slots

   • Look for the PCIe slots on your motherboard. They are usually long and may be located towards the bottom of the board.

2. Choose an Appropriate Slot

   • Select an empty PCIe x1 or x16 slot for the adapter. The x16 slots are typically longer but will accommodate the x1 card.

Step 4: Install the Wi-Fi + Bluetooth Card

1. Remove the Slot Cover

   • If necessary, unscrew and remove the metal cover from the back of the PC case that corresponds to the chosen PCIe slot.

2. Insert the Adapter

   • Align the adapter with the PCIe slot and gently but firmly push it down until it is securely seated in the slot.

3. Secure the Card

   • Use the screw you removed earlier to secure the adapter to the back of the case.

Step 5: Reassemble Your PC

1. Close the Case

   • Replace the side panel of your PC and secure it with the screws you removed earlier.

2. Reconnect Power

   • Plug your PC back into the power source and turn it on.

Step 6: Install Drivers and Software

1. Download Drivers

   • Visit the TP-Link website to download the latest drivers for the Archer TX50E adapter.

2. Install Drivers

   • Follow the on-screen instructions during the installation process to complete the driver installation.

3. Restart Your PC

   • Once the drivers are installed, restart your computer to finalize the setup.

Conclusion

Congratulations! You have successfully installed the TP-Link AX3000 Archer TX50E Wi-Fi + Bluetooth PCIe adapter in your PC. This upgrade will enhance your internet connectivity and allow you to use Bluetooth devices seamlessly. If you encounter any issues, refer to the TP-Link support page for troubleshooting tips. Enjoy your new wireless capabilities!