sablon pulpen dari awal sampai selesai

Introduction

In this tutorial, we will guide you through the process of screen printing on pens from start to finish. This is a useful skill for creating custom promotional items and souvenirs. Whether you are a beginner or looking to refine your technique, this step-by-step guide will provide you with the necessary tools and instructions to successfully complete your project.

Step 1: Gather Your Materials

Before you start, ensure you have all the required materials:

• Screen T165
• Sunrise or EPI ink
• M3 thinner
• Sharp squeegee (rakel lancip)
• Conventional screen printing table (or a regular table)
• Oil-based ink remover (like Bremol RN 100 or other brands)
• Clear lacquer
• Screen clamps or hinges
• Pens for printing

Step 2: Prepare the Screen

1. Set up the screen: Attach the screen to your printing table using clamps or hinges. Ensure it is securely in place.
2. Coat the screen: Apply a light-sensitive emulsion on the screen to create your stencil. Allow it to dry in a dark environment.
3. Expose the screen: Place your design on the screen and expose it to light according to the emulsion instructions. This creates the stencil for your printing.

Step 3: Mix the Ink

1. Prepare the ink: Pour the Sunrise or EPI ink into a mixing container.
2. Add thinner: Gradually mix in the M3 thinner until you achieve the desired consistency for printing. Aim for a smooth texture that flows easily through the screen.

Step 4: Set Up for Printing

1. Position the pen: Place the pen on the printing table, ensuring it is stable and will not move during the printing process.
2. Align the screen: Carefully lower the screen onto the pen, aligning it properly to ensure the print is in the desired position.

Step 5: Print the Design

1. Apply the ink: Use the sharp squeegee to spread the ink evenly across the screen.
2. Press down: Firmly press the squeegee down and pull it towards you. This will push the ink through the stencil onto the pen.
3. Lift the screen: Carefully lift the screen to reveal the printed design on the pen.

Step 6: Cure the Ink

1. Dry the print: Allow the printed pens to dry completely. This may take several hours depending on the ink and environmental conditions.
2. Apply clear lacquer: Once dry, spray a clear lacquer over the printed area to protect the design and enhance durability.

Step 7: Clean Up

1. Remove the ink: Use the oil-based ink remover to clean the screen and any tools used during the process.
2. Store materials: Properly store any leftover ink and materials for future use.

Conclusion

Congratulations! You have successfully completed the screen printing process on pens. Remember to practice your technique, as mastering the squeegee motion can greatly improve the quality of your prints. Consider expanding your skills by trying different materials or designs in future projects. If you have any questions, feel free to reach out or leave a comment. Happy printing!