Sherpa for Sprinter 2019 install

Introduction

This tutorial provides a detailed, step-by-step guide for installing the Owl Sherpa Cargo system specifically designed for 2019 Sprinter Vans and 2020 Revels. The Sherpa system enhances your van's storage capabilities, making it perfect for adventures and daily use. Follow these instructions to ensure a successful installation.

Step 1: Gather Your Tools and Materials

Before starting the installation, ensure you have all necessary tools and materials ready. This will streamline the process and minimize interruptions.

Tools needed

• Socket wrench set
• Torque wrench
• Drill with bits
• Level
• Measuring tape

Materials

• Owl Sherpa Cargo system kit
• Installation manual (included in the kit)

Step 2: Prepare the Installation Area

Creating a clean and organized workspace is essential for an effective installation.

• Clear out the rear of the Sprinter van.
• Lay down protective padding to prevent scratches.
• Ensure ample lighting to see all components clearly.

Step 3: Position the Sherpa System

Positioning the Sherpa system correctly is crucial for stability and functionality.

• Use the measuring tape to find the center of the rear door.
• Mark the mounting points on the van’s surface based on the instructions provided in the installation manual.

Step 4: Install the Mounting Brackets

Now it's time to secure the mounting brackets to the van.

• Align the brackets with the marked points.
• Use a drill to create pilot holes for the screws.
• Secure the brackets with screws provided in the kit, using a socket wrench for a tight fit.

Step 5: Attach the Sherpa Frame

With the brackets in place, attach the Sherpa frame.

• Lift the Sherpa frame and position it over the mounted brackets.
• Secure the frame to the brackets using bolts provided in the kit.
• Use a torque wrench to ensure bolts are tightened to the specified torque in the manual.

Step 6: Level the Cargo System

To ensure stability, it’s important to level the Sherpa cargo system.

• Use a level tool to check that the system is even horizontally.
• Adjust as necessary by loosening bolts and repositioning until level.
• Re-tighten bolts once leveled.

Step 7: Final Checks

Before finishing up, conduct a thorough check of the installation.

• Inspect all bolts and screws to ensure they are tight.
• Verify that the Sherpa system is securely attached and stable.
• Check for any obstructions or loose components.

Conclusion

You have successfully installed the Owl Sherpa Cargo system on your 2019 Sprinter Van or 2020 Revel. This system will greatly enhance your cargo capacity and organization. For additional accessories or upgrades, visit the Owl Vans website. Enjoy your newly equipped van and safe travels!