How to remove Admin on Mobigo2+ How to Unlock network on Mobigo 2 plus

Introduction

This tutorial will guide you through the process of removing the admin settings and unlocking the network on the Mobigo 2+ device. Whether you're facing issues with calling, device management, or network access, this step-by-step guide will help you resolve these problems effectively.

Step 1: Download Required Files

To begin, you will need to download specific files that will assist in the unlocking process.

• Visit the provided URL or search for "Mobigo2P Admin Remove file" online.
• Ensure that you download the correct firmware for your Mobigo 2+ model.
• Save the downloaded files to an easily accessible location on your computer.

Step 2: Prepare Your Device

Before proceeding with the unlocking process, make sure your device is ready.

• Charge your device fully to avoid interruptions during the process.
• Back up any important data, as the unlocking process may erase data.
• Remove the SIM card if it is currently inserted.

Step 3: Install Required Software

You may need software to facilitate the unlocking process.

• Install any necessary drivers or software that came with your downloaded files.
• Connect your Mobigo 2+ to your computer using a USB cable.
• Ensure the device is recognized by your computer.

Step 4: Remove Admin Settings

Follow these steps to remove admin settings from your Mobigo 2+.

• Open the software you installed.
• Select the option for "Admin Remove" or "MDM Unlock."
• Follow the on-screen instructions to initiate the process.
• If prompted, enter any required codes or information.

Step 5: Unlock the Network

Now that the admin settings have been removed, it’s time to unlock the network.

• Within the same software, locate the option for "Network Unlock" or "SIM Unlock."
• Follow the prompts to unlock the network settings.
• Wait for the process to complete, which may take a few minutes.

Step 6: Verify Changes

After completing the unlocking processes, verify that everything is functioning correctly.

• Restart your Mobigo 2+ device.
• Reinsert the SIM card.
• Check if you can make calls and access the network.

Conclusion

You have successfully removed the admin settings and unlocked the network on your Mobigo 2+ device. If you encounter any issues, double-check each step for accuracy. For further assistance, consider reaching out to tech support or consulting online forums related to Mobigo devices. Now, enjoy using your device without restrictions!