How To Replace Front Brakes 2014-2020 Nissan Rogue

Introduction

Replacing the front brakes on your 2014-2020 Nissan Rogue is essential for maintaining safe driving conditions. This tutorial will guide you through the process step-by-step, ensuring you have the knowledge and tools necessary to perform the replacement yourself. Regular brake maintenance, typically every 50,000 miles, is crucial for optimal vehicle performance and safety.

Step 1: Gather Your Tools and Materials

Before you begin the replacement, collect all the necessary tools and materials to streamline the process:

• Pocket Screwdriver
• Pry Bar
• Ratchet
• Torque Wrench
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Floor Jack
• Wheel Chocks
• Wire Brush

Step 2: Prepare the Vehicle

1. Park the vehicle on a flat surface and engage the parking brake.
2. Place wheel chocks behind the rear wheels to prevent the vehicle from rolling.
3. Use a floor jack to lift the front of the vehicle and secure it with jack stands.

Step 3: Remove the Wheel

1. Using a ratchet, loosen the lug nuts on the front wheel.
2. Remove the wheel and set it aside, exposing the brake components.

Step 4: Inspect the Brake Components

1. Look for signs of wear on the brake pads and rotors.
2. Check for any grooving or warping on the rotors, as these issues may require replacement.

Step 5: Remove the Old Brake Pads

1. Locate the caliper bolts and use the ratchet to remove them.
2. Once the caliper is detached, gently pull it away from the rotor.
3. Remove the old brake pads from the caliper bracket.

Step 6: Remove the Brake Rotor

1. If the rotor is held in place by screws, remove them using a screwdriver.
2. Slide the rotor off the hub. If it’s stuck, tap it lightly with a hammer to loosen it.

Step 7: Install the New Rotor

1. Place the new rotor onto the hub, ensuring it’s seated properly.
2. If applicable, reinsert and tighten any screws to secure the rotor in place.

Step 8: Install New Brake Pads

1. Apply brake grease to the back of the new brake pads to prevent squeaking.
2. Slide the new brake pads into the caliper bracket, ensuring they fit snugly.

Step 9: Reattach the Caliper

1. Carefully position the caliper over the new brake pads.
2. Reinsert and tighten the caliper bolts using the ratchet.

Step 10: Reinstall the Wheel

1. Place the wheel back onto the hub.
2. Hand-tighten the lug nuts, then lower the vehicle from the jack stands.
3. Use the torque wrench to tighten the lug nuts to the manufacturer’s specifications.

Conclusion

You have successfully replaced the front brakes on your 2014-2020 Nissan Rogue. Regular maintenance of your brake system is vital for safety and performance. After replacing the brakes, it’s advisable to test drive the vehicle to ensure everything is functioning correctly. If you experience any unusual noises or braking issues, consult a professional mechanic. Regularly check your brakes to stay ahead of wear and ensure a safe driving experience.