PC Zusammenbauen für Anfänger - ANLEITUNG & TUTORIAL für AMD & Intel

Introduction

This tutorial is designed for beginners looking to build their first PC. We will guide you through each step of the assembly process, covering essential components, installation techniques, and common pitfalls. By the end, you will have a clear understanding of how to successfully assemble a PC with either AMD or Intel components.

Step 1: Prepare Your Workspace

• Choose a clean, well-lit workspace.
• Gather necessary tools such as a screwdriver, anti-static wrist strap, and a workspace mat.
• Organize your components for easy access.

Step 2: Install the CPU

Step 2a: Install Intel CPU

• Open the CPU socket lever on the motherboard.
• Align the CPU with the socket (match the triangle indicators).
• Gently place the CPU into the socket and close the lever.

Step 2b: Install AMD CPU

• Open the CPU socket lever.
• Align the CPU with the socket.
• Carefully place the CPU in the socket and lower the lever to secure it.

Step 3: Install the M.2 SSD

• Locate the M.2 slot on the motherboard.
• Remove the screw holding the M.2 slot cover (if applicable).
• Insert the M.2 SSD at a slight angle and press down.
• Secure it with the screw.

Step 4: Install the CPU Cooler

Step 4a: Install Intel Cooler

• Apply thermal paste (if not pre-applied) to the CPU.
• Place the cooler on top of the CPU and secure it according to the manufacturer's instructions.

Step 4b: Install AMD Cooler

• If using the stock cooler, ensure the mounting brackets are in place.
• Apply thermal paste (if not pre-applied).
• Secure the cooler to the CPU.

Step 5: Prepare the Case

• Remove side panels from the PC case.
• Install standoffs for the motherboard if not pre-installed.
• Ensure cable management options are accessible.

Step 6: Install the Motherboard

• Align the motherboard with the standoffs in the case.
• Use screws to secure the motherboard in place.

Step 7: Install the Power Supply

• Place the power supply unit (PSU) into the designated area in the case.
• Secure it with screws and ensure the fan is properly oriented for airflow.

Step 8: Connect Cables

• Connect the 24-pin ATX power cable and the CPU power cable to the motherboard.
• Attach SATA cables to the SSD and other drives.
• Connect front panel connectors (power, reset, USB, and audio).

Step 9: Install RAM

• Open the RAM slots by pushing down the clips.
• Align the RAM stick with the slot and press down firmly until it clicks into place.

Step 10: Apply Thermal Paste

• If not using a pre-applied cooler, apply a pea-sized amount of thermal paste on the CPU.

Step 11: Install Additional Cooling

Step 11a: Install Air Cooler

• Follow the manufacturer's instructions to secure the air cooler.

Step 11b: Install Liquid Cooling

• Mount the radiator in the designated area and secure it.
• Connect the pump to the CPU and power it.

Step 12: Install the Graphics Card

• Remove the PCIe slot covers from the case.
• Insert the graphics card into the PCIe slot and secure it with screws.
• Connect any necessary power cables to the graphics card.

Step 13: Install Additional Storage Drives

• Mount any additional HDDs or SSDs in their respective bays.
• Connect them using SATA cables and power connectors.

Step 14: Final Check

• Double-check all connections and ensure everything is secure.
• Organize cables for better airflow and aesthetics.

Step 15: Install Operating System

• Connect your monitor, keyboard, and mouse.
• Power on the PC and enter the BIOS to configure settings.
• Install your preferred operating system using a bootable USB drive.

Conclusion

Congratulations! You have successfully assembled your first PC. Remember to keep your workspace organized and take your time during each step. If you encounter any issues, refer back to this guide or seek help in the comments. Happy computing!