איך לתקן נזילה בניאגרה סמויה של פלסאון - החלפת גומיה

Introduction

This tutorial will guide you through the process of fixing a leak in a concealed toilet cistern using a new rubber gasket. A leaking toilet can lead to water waste and increased utility bills, so learning this simple repair can save you time and money.

Step 1: Gather Your Tools and Materials

Before starting the repair, ensure you have the following tools and materials on hand:

• New rubber gasket (compatible with your cistern model)
• Adjustable wrench
• Screwdriver
• Bucket or towel (to catch any water)
• Safety gloves

Step 2: Turn Off the Water Supply

• Locate the water shut-off valve, usually found near the bottom of the toilet.
• Turn the valve clockwise to stop the water flow.
• Flush the toilet to empty the cistern and remove excess water.

Step 3: Remove the Cistern Cover

• Carefully lift off the cistern cover and set it aside in a safe place.
• Take note of how the internal components are arranged for reassembly later.

Step 4: Inspect the Internal Parts

• Examine the flush mechanism and the rubber gasket for signs of wear or damage.
• If the gasket appears worn out or cracked, it needs to be replaced.

Step 5: Remove the Old Gasket

• Use a screwdriver to detach the flush mechanism if necessary.
• Gently pull the old gasket away from its position.
• Clean the area around the gasket to ensure a proper seal for the new gasket.

Step 6: Install the New Gasket

• Position the new rubber gasket in place, ensuring it fits snugly.
• Reattach the flush mechanism if you removed it earlier.

Step 7: Reassemble the Cistern

• Replace the cistern cover carefully.
• Ensure all components are correctly positioned and secured.

Step 8: Turn the Water Supply Back On

• Slowly turn the shut-off valve counterclockwise to restore the water flow.
• Allow the cistern to fill up and check for any leaks around the new gasket.

Practical Tips

• Always wear safety gloves when handling plumbing components.
• If you encounter significant resistance or issues, consult a professional plumber.
• Keep a towel handy to dry any spills during the repair process.

Common Pitfalls to Avoid

• Not turning off the water supply can lead to flooding.
• Forgetting to clean the area before installing the new gasket may cause future leaks.
• Improperly securing the cistern cover can lead to misalignment of internal components.

Conclusion

Replacing a worn-out rubber gasket in a concealed toilet cistern is a straightforward task that can prevent leaks and save water. By following these steps, you can perform the repair yourself confidently. If you encounter any difficulties or the leak persists, consider reaching out to a plumbing professional for assistance.