Pedal Control Install

Introduction

This tutorial provides a step-by-step guide for installing the Pedal Control system in your Sprinter van, Revel, or Storyteller. The installation process is designed to be quick and straightforward, enhancing your vehicle's control and responsiveness.

Step 1: Gather Necessary Tools and Materials

Before starting the installation, ensure you have the following tools and materials ready:

• Pedal Control unit (available at owlvans.com)
• Screwdriver set
• Wrench set
• Wire strippers
• Electrical tape
• Zip ties

Practical Tips

• Review the user manual of your Pedal Control for specific details.
• Organize your workspace to make the process smoother.

Step 2: Locate the Pedal Area

• Open the driver's side door and access the footwell.
• Remove any floor mats or coverings to reveal the area around the accelerator pedal.

Common Pitfalls

• Ensure that the vehicle is turned off before starting the installation to avoid any accidents.

Step 3: Remove the Existing Pedal Cover

• Use your screwdriver to unscrew the existing cover on the accelerator pedal.
• Carefully detach the cover without damaging any underlying components.

Step 4: Install the Pedal Control Unit

• Align the Pedal Control unit with the accelerator pedal.
• Secure it using the screws provided with the unit.

Practical Advice

• Make sure the unit is firmly attached and does not obstruct the normal operation of the pedal.

Step 5: Connect the Wiring

• Identify the wiring harness that connects to the Pedal Control.
• Use wire strippers to prepare the ends of the wires if necessary.
• Connect the wires as per the instructions in the user manual.

# Example wiring connections (this is a sample, refer to your manual)
red wire -> positive terminal
black wire -> negative terminal

Tips for a Secure Connection

• Ensure all connections are tight and insulated using electrical tape.
• Use zip ties to manage any excess wiring neatly.

Step 6: Test the Installation

• Reconnect the vehicle battery if it was disconnected during installation.
• Start the vehicle and gently press the accelerator pedal to ensure the Pedal Control is functioning correctly.

Troubleshooting

• If the Pedal Control does not respond, double-check all wiring connections and ensure the unit is securely mounted.

Conclusion

You have successfully installed the Pedal Control in your Sprinter van, Revel, or Storyteller. This upgrade will enhance your driving experience with improved pedal responsiveness. For any questions or further assistance, feel free to reach out to the Owl team at 866-505-9277. Happy driving!