Owl Sprinter B2Pro and B2 Classic Install

Introduction

This tutorial provides step-by-step instructions for installing the Owl Sprinter B2Pro and B2 Classic carriers on your Mercedes Sprinter van. The B2 PRO is designed for enhanced strength, versatility, and functionality, making it a perfect choice for adventures that require robust cargo solutions.

Step 1: Gather Required Tools and Materials

Before beginning the installation, ensure you have the following tools and materials ready:

• Owl B2 PRO carrier
• Stainless hardware with black oxide coating
• Door armor plate
• 2.25" bushing
• Drill with a suitable bit
• Torque wrench
• Level
• Safety gear (gloves, goggles)

Step 2: Prepare the Installation Area

• Clean the Door Area: Make sure the area around the door where the carrier will be mounted is clean from dirt and debris.
• Check for Obstructions: Ensure there are no wires, cables, or other obstructions behind the door panel that might interfere with the installation.

Step 3: Position the Carrier

• Align the Carrier: Hold the B2 PRO carrier against the door to find the optimal position. The mounting plate should align with the door frame.
• Use a Level: Ensure the carrier is level before marking any drill points.

Step 4: Mark and Drill the Hole

• Mark the Drill Point: Using a marker, indicate where the drilling will occur based on the carrier’s mounting template.
• Drill the Hole: Carefully drill a single hole through the door using the appropriate drill bit. This is crucial as it minimizes modifications to your vehicle.

Step 5: Install the Door Armor Plate

• Attach the Armor Plate: Position the door armor plate over the drilled hole. This plate is designed to enhance the strength of the installation.
• Secure with Hardware: Use the provided stainless hardware to secure the armor plate in place.

Step 6: Mount the Carrier

• Align the Carrier with the Armor Plate: Position the B2 PRO carrier so that it aligns with the armor plate and the drilled hole.
• Insert the 2.25" Bushing: Place the bushing through the hole to stabilize the carrier.
• Tighten the Hardware: Using a torque wrench, tighten the hardware to secure the carrier firmly to the door. Ensure it is tightened to the manufacturer’s specifications for safety.

Step 7: Test the Installation

• Check Stability: Once installed, gently shake the carrier to ensure it is securely mounted.
• Perform a Load Test: If possible, test the carrier with some weight (up to 200 lbs) to confirm its stability and functionality.

Conclusion

You have successfully installed the Owl Sprinter B2Pro carrier on your Mercedes Sprinter van. This carrier not only enhances your vehicle's storage capabilities but also provides a rugged solution for transporting bicycles and other gear. For optimal performance, regularly inspect the installation and maintain the carrier according to the manufacturer’s guidelines. Now you’re ready to embark on your next adventure!