T&S Profilomètres Conturomatic - Mesure Contour et Rugosité

Introduction

This tutorial provides a comprehensive guide on using the T&S Profilomètres Conturomatic for measuring contour and roughness. The Conturomatic series is designed for precise measurements of various geometric features including radii, angles, and surface roughness. This guide will walk you through the steps to effectively operate these profilometers, ensuring accurate calibration and measurement.

Step 1: Understanding the Equipment

• Identify the Models: Familiarize yourself with the two main models:
  • CV Model: Unidirectional probing.
  • TS Model: Bidirectional probing (up and down).
• Features: Both models are equipped with robust mechanics and an intuitive software interface in French.

Step 2: Setting Up the Profilometer

• Prepare the Workspace: Ensure your workspace is clean and free of debris to avoid measurement interference.
• Connect the Device: Plug in the profilometer and connect it to your computer if necessary.
• Install Software: Download and install the Conturomatic software, ensuring you have access to user instructions in French.

Step 3: Calibration and Etalonnage

• Automated Calibration: Follow these steps for automated calibration:
  1. Access the calibration feature in the software.
  2. Follow the on-screen prompts to calibrate the probe.
  3. Ensure the probe is touching a known reference point for accuracy.
• Check Calibration: After calibration, perform a test measurement to confirm accuracy.

Step 4: Conducting Measurements

• Select Measurement Type: Choose the specific measurement type you want to perform, such as:
  • Radii
  • Angles
  • Distances
  • Roughness
• Position the Probe: Carefully position the probe on the surface to be measured.
• Initiate Measurement: Start the measurement process using the software interface.

Step 5: Analyzing Results

• High Precision Analysis: Utilize the software to view and analyze measurement results.
• Exporting Data: Save the results in various formats:
  • CSV
  • DXF
  • PDF
• Generate Reports: Use the software to create detailed measurement reports as needed.

Step 6: Special Probes and Customization

• Consultation for Probes: If you require specific probes for your measurements, contact PMS BECUS Métrologie for advice.
• Custom Stylets: Inquire about the possibility of creating special stylets tailored to your measurement needs.

Conclusion

Using the T&S Profilomètres Conturomatic effectively involves understanding the equipment, setting it up correctly, calibrating accurately, and analyzing the results proficiently. By following these steps, you can ensure precise measurements of contours and roughness, enhancing your measurement processes. For any specialized needs, don't hesitate to reach out to PMS BECUS Métrologie for further assistance.