How to Replace Cabin Air Filter 2020 Ford Explorer AQ1293

Introduction

This tutorial provides a step-by-step guide on how to replace the cabin air filter in a 2020 Ford Explorer. A clean cabin air filter ensures that the air inside your vehicle remains fresh and helps maintain optimal air quality. Regular replacement of this filter can enhance the performance of your vehicle's HVAC system.

Chapter 1: Open the glovebox

• Locate the glovebox in your Ford Explorer.
• Open the glovebox fully to access the internal components.

Chapter 2: Remove the dampener arm

• Identify the dampener arm on the right side of the glovebox.
• Push in on both sides of the dampener arm to unhook it from the glovebox.

Chapter 3: Lower the glovebox

• Carefully lower the glovebox down to release it from its stops.
• This will provide better access to the filter housing.

Chapter 4: Locate the filter housing screws

• Look for the two screws securing the cabin air filter housing door.
• Note that in some models, these screws may be missing. Make sure to check for them.

Chapter 5: Remove the old filter

• Unclip both sides of the filter housing door to open it.
• Carefully pull out the old cabin air filter from the housing.
• Clean out any debris or dust inside the housing to ensure optimal performance.

Chapter 6: Install the new filter

• Take your new cabin air filter and ensure the airflow arrow is pointing down.
• Insert the new filter into the housing properly.
• Close the filter housing door and reclip it securely.
• Partially reinstall the screws to secure the housing door.

Chapter 7: Reinstall the glovebox

• Gently raise the glovebox back into its original position.
• Ensure that the stops re-engage properly.

Chapter 8: Reinstall the dampener arm

• Clip the dampener arm back onto the right side of the glovebox.
• Make sure it is firmly attached to ensure smooth operation of the glovebox.

Chapter 9: Close the glovebox

• Close the glovebox completely to finish the installation process.

Conclusion

You have successfully replaced the cabin air filter in your 2020 Ford Explorer. Regularly checking and replacing the cabin air filter can improve air quality inside the vehicle and keep your HVAC system functioning efficiently. For future replacements, you can order parts at filterheads.com. Don't forget to like the video and subscribe to the channel for more helpful content!