CARA MEMBUAT TEMPAT PENSIL GULUNG | pencil case | DIY

Introduction

In this tutorial, we will learn how to create a stylish and functional roll-up pencil case that can hold up to 12 pencils. This DIY project is perfect for organizing your stationery and adds a personal touch to your school or office supplies. The materials required are easily accessible, making it a fun and creative activity.

Step 1: Gather Your Materials

Before starting the project, ensure you have the following materials ready:

• Two pieces of fabric measuring 30 x 25 cm
• One piece of fabric measuring 15 x 25 cm
• Ribbon for tying the case
• Thread and needle (or a sewing machine)
• Scissors
• Measuring tape or ruler
• Fabric chalk or marker

Step 2: Prepare the Fabric

1. Cut the Fabric:

   • Use your measuring tape to confirm the dimensions of your fabric pieces.
   • Cut the fabric if necessary, ensuring you have two 30 x 25 cm pieces and one 15 x 25 cm piece.

2. Mark Pencil Slots:

   • On one of the 30 x 25 cm pieces, use fabric chalk to mark where the pencil slots will be.
   • Aim for 12 evenly spaced slots. A good way to do this is to divide the width into equal sections for each pencil.

Step 3: Create Pencil Slots

1. Sew Slots:

   • Using a sewing machine or a needle and thread, sew straight lines on the marked slots.
   • Start from the top of the fabric and sew downward, leaving enough space at the bottom for the pencils to fit comfortably.

2. Finish Edges:

   • To prevent fraying, finish the edges of the fabric with a zigzag stitch or by folding them over and sewing a straight line.

Step 4: Assemble the Pencil Case

1. Layer the Fabric:

   • Place the 15 x 25 cm piece on top of the 30 x 25 cm piece with the pencil slots, aligning the edges.

2. Sew the Layers Together:

   • Sew around the edges of the fabric, leaving a small opening to turn the fabric inside out later.

3. Turn Inside Out:

   • Carefully pull the fabric through the opening to turn it right side out, making sure the pencil slots are on the outside.

Step 5: Add the Ribbon

1. Prepare the Ribbon:

   • Cut a piece of ribbon to your desired length for tying the pencil case.

2. Attach the Ribbon:

   • Sew or glue the ribbon to the edge of the pencil case, ensuring it is secure. This will be used to roll and hold the case closed.

Step 6: Final Touches

1. Close the Opening:

   • Hand sew or machine sew the opening you left earlier to close the pencil case completely.

2. Test the Pencil Case:

   • Insert your pencils into the slots to ensure they fit well and the case rolls up easily.

Conclusion

Congratulations! You have successfully made a roll-up pencil case. This personalized pencil case not only helps keep your stationery organized but also showcases your crafting skills. Feel free to experiment with different fabrics and colors to make it uniquely yours. Happy crafting!