DIY replace or install dishwasher for beginners!

Step-by-Step Tutorial: How to Replace or Install a Dishwasher for Beginners

Materials Needed:

1. Drill with interchangeable bits
2. New water hose
3. Different wrenches
4. Screwdriver
5. Towel
6. Dishwasher hose clamp
7. Ground wire clamp
8. New dishwasher

Step 1: Preparation

1. Gather all the necessary materials mentioned above.
2. Plan for about 1 to 1.5 hours for this task, especially if it's your first time.

Step 2: Removing the Old Dishwasher

1. Turn off the power to the dishwasher from the breaker box.
2. Locate and remove the cover at the bottom of the dishwasher to access the bolts on each side.
3. Unscrew and remove both bolts to expose the components.
4. Disconnect the black and white wires from the electrical box.
5. Close the valve supplying water to the dishwasher.
6. Unscrew the water supply elbow from the dishwasher and set it aside.
7. Loosen the brackets securing the dishwasher to the countertop.
8. Carefully pull out the dishwasher, ensuring not to stress the water, electrical, or disposal lines.
9. Assess the water hose and replace it if necessary.

Step 3: Disconnecting the Old Dishwasher

1. Remove the water supply line by slipping it out from underneath the dishwasher.
2. Unclamp and disconnect the disposal line.
3. Disconnect the electrical wires and remove the old dishwasher.

Step 4: Installing the New Dishwasher

1. Lay the new dishwasher on its back.
2. Attach the water supply line and secure it with a clamp.
3. Connect the electrical wires using a clamp and ensure they are secure.
4. Tuck away the wires neatly and put the box cover back on.
5. Secure the ground wire and tighten the electrical wire clamp.
6. Reattach the dishwasher to the countertop using the brackets.
7. Connect the drain hose from the new dishwasher to the house's drain hose.
8. Secure the insulation from the old dishwasher on top of the new one if desired.
9. Adjust the height of the dishwasher using the peg legs if needed.
10. Turn the water supply back on and check for any leaks.

Step 5: Final Checks

1. Double-check all connections and make sure everything is securely in place.
2. Test the dishwasher to ensure it is working properly.

By following these steps carefully, you should be able to successfully replace or install a dishwasher, even if you are a beginner.