How to Map a Point with the Skadi Smart Handle’s Extensible Virtual Range Pole in ArcGIS Field Maps

Introduction

This tutorial will guide you through the process of mapping a point using the Extensible Virtual Range Pole with the Skadi Smart Handle in ArcGIS Field Maps. This setup enhances data collection efficiency and accuracy when using Skadi GNSS receivers.

Step 1: Pair Your Skadi GNSS Receiver with iOS

• Ensure your Skadi GNSS receiver is powered on.
• Open the Bluetooth settings on your iOS device.
• Look for your Skadi device in the list of available devices and select it to pair.
• Confirm the connection on both the receiver and your iOS device.

Step 2: Set Up Orthometric Height in Eos Tools Pro

• Launch Eos Tools Pro on your device.
• Navigate to the settings or configuration section.
• Input the orthometric height data specific to your project.
• Save your settings to ensure the height data is applied during mapping.

Step 3: Configure Your RTK Connection in Eos Tools Pro

• Open Eos Tools Pro and go to the RTK settings.
• Select your desired RTK connection method (e.g., NTRIP, RTK base station).
• Enter the necessary credentials and connection details.
• Test the connection to ensure it is stable before proceeding.

Step 4: Enable and Initialize Your Skadi Smart Handle

• Turn on the Skadi Smart Handle.
• Follow the prompts on the handle to initialize it, ensuring it is ready for use.
• Confirm that the handle is properly connected to the GNSS receiver.

Step 5: Set Your Location Provider in ArcGIS Field Maps

• Open ArcGIS Field Maps on your device.
• Go to the settings section.
• Select the location provider option.
• Choose the Skadi GNSS receiver as your location provider for accuracy.

Step 6: Configure Your Location Profile in ArcGIS Field Maps

• In the settings menu, navigate to the location profiles.
• Create or select a profile that suits your data collection needs.
• Adjust settings such as accuracy and update frequency as necessary.

Step 7: Adjust Collection Settings in ArcGIS Field Maps

• Access the collection settings in ArcGIS Field Maps.
• Define the attributes and fields relevant to your data collection.
• Set up any required templates or predefined values to streamline the collection process.

Step 8: Understand GNSS vs. Compensated Coordinate Values

• Familiarize yourself with the difference between GNSS values (raw satellite data) and compensated coordinate values (corrected for various factors).
• Use Eos Tools Pro to view and analyze these values for better accuracy in your data collection.

Step 9: Collect a Point Using the Extensible Virtual Range Pole

• Position the Extensible Virtual Range Pole at the desired location.
• Ensure it is properly calibrated and aligned with your GNSS receiver.
• In ArcGIS Field Maps, start the point collection process.
• Follow prompts to confirm the point location and save the data.

Conclusion

You have now learned how to effectively set up and collect points using the Extensible Virtual Range Pole with the Skadi Smart Handle in ArcGIS Field Maps. By following these steps, you'll enhance your GNSS data collection workflow. For further learning, consider exploring additional Skadi Smart Handle resources and tutorials available online.