Dyson Ball Animal 2 - DEEP CLEAN - Restore Suction - Troubleshooting

Introduction

This tutorial provides step-by-step instructions for deep cleaning and troubleshooting your Dyson Ball Animal 2 vacuum. If you're experiencing reduced suction or other performance issues, these steps will help restore functionality and ensure your vacuum operates at its best.

Step 1: Check the Brushroll

• Remove the brush roll: Turn off and unplug your vacuum. Use a screwdriver to detach the brush roll from the vacuum head.
• Inspect for hair and debris: Clear out any tangled hair or debris that may be hindering the brush roll's movement.
• Reattach the brush roll: Once cleaned, reattach the brush roll securely to the vacuum head.

Step 2: Reattach the Head

• Align the vacuum head: Position the head back onto the main body of the vacuum.
• Secure the connection: Make sure it clicks into place firmly to ensure proper suction.

Step 3: Check for Blockages

• Inspect all hose connections: Look for any blockages in the hose, wand, and any attachments.
• Use a flashlight: Shine a light through the hose to check for obstructions.
• Clear any blockages: If you find debris, remove it carefully to restore airflow.

Step 4: Clean the Canister and Cyclone

• Empty the canister: Detach the canister and empty it into a trash bin.
• Rinse the canister: Use warm water to rinse the inside of the canister. Ensure all dust and debris are removed.
• Clean the cyclone: If the cyclone has debris, rinse it under running water and allow both components to dry completely before reattaching.

Step 5: Inspect the Hose

• Check for cracks or tears: Inspect the entire length of the hose for any damage.
• Replace if necessary: If the hose is damaged, consider replacing it. A compatible replacement can be found here.
• Reattach the hose: Once verified, reattach the hose ensuring it fits snugly.

Step 6: Clean or Replace the Filters

• Locate the filters: The Dyson Ball Animal 2 typically has two filters—one in the ball and one near the motor.
• Wash the filters: Rinse the filters under cold water until the water runs clear. Do not use detergent.
• Dry completely: Allow the filters to air dry for at least 24 hours before reinstalling.

Conclusion

By following these steps, you can effectively deep clean and troubleshoot your Dyson Ball Animal 2 vacuum. Regular maintenance, including cleaning the brush roll, checking for blockages, and washing the filters, will help maintain optimal suction and prolong the life of your vacuum. If issues persist after these steps, consider consulting a professional or contacting Dyson customer support for further assistance.