TUTORIAL - How To Change A Door Knob Home Repair

Introduction

Changing a doorknob is a straightforward home repair task that can enhance both the functionality and appearance of your doors. This tutorial will guide you through the simple steps to replace a doorknob in just a few minutes, making your home improvement project quick and easy.

Step 1: Gather Your Tools

Before you start, ensure you have the following tools and materials ready:

• New doorknob set
• Screwdriver (flathead or Phillips, depending on your screws)
• Drill (if required for new holes)
• Safety glasses (optional for protection)

Step 2: Remove the Old Doorknob

1. Locate the screws: Check the side of the doorknob for visible screws. If there are no visible screws, look for a small hole on the side of the knob that may require a flathead screwdriver to release the knob.
2. Unscrew the doorknob: Use your screwdriver to remove the screws holding the doorknob in place. Keep the screws in a safe location for potential future use.
3. Take off the knob: Once the screws are removed, gently pull the doorknob apart from the door. If it’s stuck, wiggle it slightly to loosen it.

Step 3: Remove the Latch Plate

1. Unscrew the latch plate: The latch plate is the metal piece on the edge of the door that secures the latch. Remove the screws securing it.
2. Take out the latch: Pull the latch out of the door. If necessary, use a flathead screwdriver to pry it gently.

Step 4: Install the New Latch

1. Insert the new latch: Take your new latch and insert it into the opening in the door. Ensure it aligns correctly with the hole and the edge of the door.
2. Secure the latch plate: Place the latch plate over the latch and screw it into place firmly.

Step 5: Attach the New Doorknob

1. Position the doorknob: Take one part of the new doorknob and insert it into the hole on one side of the door.
2. Align the other half: On the opposite side, align the other half of the doorknob with the inserted part.
3. Secure the doorknob: Tighten the screws to secure the doorknob in place. Ensure everything is snug but avoid overtightening which can damage the knob.

Step 6: Test the Doorknob

• Check functionality: Turn the doorknob to ensure it opens and closes smoothly.
• Test the latch: Make sure the latch engages properly when the door is closed.

Conclusion

Changing a doorknob is a simple project that improves your door's functionality and aesthetics. By following these straightforward steps, you can complete the task in about five minutes. If you encounter any issues during installation, double-check your alignment and screw tightness. Enjoy your newly installed doorknob, and consider exploring other DIY projects to enhance your home!