Comment poser du parquet massif collé ? (Castorama)

Introduction

This tutorial will guide you through the process of installing glued solid wood flooring, a durable and aesthetically pleasing choice for your home. By following these seven steps, you can achieve a professional-looking floor that enhances your interior decor.

Step 1: Adjusting the Doors

Before you start laying the parquet, ensure that your doors can open freely over the new flooring.

• Measure the height of the new floor.
• If necessary, trim the bottom of the doors to avoid scraping against the floor.

Step 2: Preparing the First Row

Setting up the first row correctly is crucial for a successful installation.

• Start by cleaning the subfloor to remove any debris.
• Use spacers to maintain a gap between the wall and the first row of planks, allowing for expansion.
• Lay the first plank in the corner of the room, ensuring it is straight and aligned.

Step 3: Laying the Parquet

Now it's time to lay down the flooring.

• Take the next plank and apply glue along the tongue side.
• Fit the plank into the previous one at an angle and press it down flat.
• Continue this process, ensuring each plank is tightly secured and properly aligned.

Step 4: Installing Angled Corners

When you reach corners or angles, special care is needed.

• Measure and cut the plank to fit the angle using a miter saw.
• Apply glue and install the plank as previously described, ensuring a snug fit.

Step 5: Laying the Last Row

The last row requires special attention for a seamless finish.

• Measure the remaining space and cut the last plank to fit.
• Use a pull bar to ensure the last row is pressed tightly against the previous one.
• Maintain the expansion gap on the wall side.

Step 6: Making Special Cuts

Occasionally, you will need to make unique cuts for outlets or other obstacles.

• Use a jigsaw to carefully cut around any obstacles.
• Ensure that any cuts are clean and that the planks fit snugly.

Step 7: Finishing Touches

Completing the installation involves adding finishing elements.

• Remove spacers and install baseboards to cover the expansion gap.
• Clean the floor to remove any excess glue and debris.
• Consider applying a wood finish or sealant for added protection.

Conclusion

By following these steps, you can successfully install solid wood flooring that enhances the beauty and value of your home. Ensure you have all the necessary tools and materials beforehand, including spacers and glue. Enjoy your new flooring and the warmth it brings to your space!