Thermo Aquatuner Tutorial | Oxygen Not Included

Introduction

This tutorial provides a comprehensive guide on using the Thermo Aqua Tuner in Oxygen Not Included. The Thermo Aqua Tuner is a powerful device that cools liquids while generating heat, making it essential for managing temperature in your base. This guide will walk you through its setup, operation, and practical applications.

Step 1: Understanding the Thermo Aqua Tuner

• The Thermo Aqua Tuner cools liquids by 14 degrees, regardless of the liquid type.
• It generates significant heat (approximately 585,000 DTUs) during the cooling process.
• It is crucial to manage this heat to prevent overheating, which occurs when the temperature exceeds 325 degrees for steel and even higher for thermium.

Step 2: Setting Up the Thermo Aqua Tuner

• Placement: Ensure the Thermo Aqua Tuner is built on insulated tiles to prevent heat transfer to the environment.
• Power Requirements: Connect it to a power source capable of supplying 1200 watts.
• Steam Management: Ideally, place the Tuner in a steam room to absorb excess heat using a steam turbine.

Step 3: Building the Cooling System

1. Create a Steam Room:

   • Fill the room with a layer of water and a layer of polluted water to manage heat effectively.
   • Use the materials overlay (F4) to check liquid levels.

2. Piping Setup:

   • Use insulated pipes for coolant transport to prevent heat absorption.
   • Implement radiant liquid pipes in areas where you want to chill water.

3. Install Automation:

   • Integrate a liquid pipe thermo sensor to control the Tuner based on liquid temperature.
   • Optionally, use a timer sensor to limit the Tuner’s operation time.

Step 4: Managing Liquid Inputs

• Choose the Right Liquid: Use liquids that don’t solidify easily, like super coolant, for maximum efficiency.
• Control Flow: Use bridges in your piping setup to ensure continuous liquid flow and prevent bottlenecks.

Step 5: Finalizing the Setup

• Liquid Vent Installation: Ensure a liquid vent is included to allow steam to escape, preventing overheating.
• Fill the Cooling Loop: Use a liquid meter valve to fill your coolant system accurately without overfilling.
• Check for Air Gaps: Minimize air gaps in your piping to maintain effective thermal mass.

Conclusion

The Thermo Aqua Tuner is a versatile tool for managing temperature in Oxygen Not Included. By following these steps, you can efficiently set up and operate a cooling system that keeps your base functioning smoothly. Experiment with different configurations and liquids to find the best solutions for your unique needs. If you have further questions or need assistance, engage with the community for support. Enjoy your gameplay!