Cara Edit Suara jadi Lebih Jelas..!

Introduction

This tutorial will guide you through the process of enhancing your audio quality using Adobe Audition. Whether you're creating a podcast or voiceover, you'll learn how to reduce noise, apply compression, equalize sound, and increase loudness, resulting in clearer and more professional audio.

Step 1: Setting Up Adobe Audition

• Open Adobe Audition.
• Import your audio file by clicking on "File" and selecting "Import."
• Choose the audio file you want to edit.

Step 2: Noise Reduction

• Select the section of your audio that contains only noise.
• Go to "Effects" > "Noise Reduction" > "Capture Noise Print."
• Highlight your entire audio track.
• Navigate to "Effects" > "Noise Reduction" > "Noise Reduction (process)."
• Adjust the settings to reduce unwanted noise while preserving the audio quality.

Step 3: Applying Compression

• Select your audio track.
• Go to "Effects" > "Amplitude and Compression" > "Compressor."
• Adjust the threshold and ratio to control the dynamic range.
  • A good starting point: Threshold at -20 dB, Ratio at 3:1.
• Listen to the changes and fine-tune the settings to find the best balance.

Step 4: Equalization

• With your audio track selected, go to "Effects" > "Filter and EQ" > "Parametric Equalizer."
• Use the EQ to enhance or reduce specific frequencies:
  • Boost frequencies around 3 kHz for clarity.
  • Cut frequencies below 80 Hz to remove rumble.
• Apply the changes and listen to the audio for improvement.

Step 5: Cutting Audio with Razor Tool

• Select the Razor Tool from the toolbar.
• Click on the audio waveform where you want to cut.
• Remove any unnecessary sections by selecting them and pressing the delete key.

Step 6: DeReverb

• Select your audio track.
• Go to "Effects" > "Noise Reduction/Restoration" > "DeReverb."
• Adjust the settings to minimize room echo and improve clarity.

Step 7: Adjusting Loudness

• Go to "Effects" > "Amplitude and Compression" > "Normalize (process)."
• Set the peak amplitude to around -1 dB to ensure no clipping occurs.
• You can also use the "Loudness Radar" to analyze and adjust your loudness levels.

Step 8: Exporting Your Audio

• Once you're satisfied with your edits, go to "File" > "Export" > "Multitrack Mixdown."
• Choose the desired format (WAV, MP3, etc.) and set your export settings.
• Click on "OK" to save your edited audio.

Conclusion

In this tutorial, you’ve learned how to enhance your audio using Adobe Audition through noise reduction, compression, equalization, and loudness adjustments. These steps will help ensure your podcasts and voiceovers sound professional and clear. Experiment with these techniques to find the best settings for your specific audio needs. Happy editing!