2018 Hyundai elantra motor mount replacement

Introduction

This tutorial will guide you through the process of replacing the motor mounts on a 2018 Hyundai Elantra. Replacing motor mounts can help reduce vibrations and ensure a smoother ride. Whether you're a DIY enthusiast or just looking to save on repair costs, this step-by-step guide will provide you with the necessary instructions and tips.

Step 1: Gather Your Tools and Materials

Before starting the replacement, ensure you have the following tools and materials ready:

• Socket set (including metric sizes)
• Ratchet and extensions
• Torque wrench
• Screwdrivers (flathead and Phillips)
• Jack and jack stands
• Replacement motor mounts
• Engine support brace (optional but recommended)

Practical Tips

• Always wear safety gear, including gloves and glasses.
• Work on a flat surface to ensure stability while using a jack.

Step 2: Secure the Vehicle

1. Park the Vehicle: Ensure the car is on a level surface and engage the parking brake.
2. Lift the Vehicle:
   • Use a jack to lift the front of the vehicle.
   • Place jack stands underneath the vehicle for safety.

Step 3: Remove Engine Covers and Components

1. Open the Hood: Access the engine bay.
2. Remove Engine Cover: If applicable, remove any plastic engine covers that may obstruct access to the motor mounts.
3. Disconnect Battery: Always disconnect the negative terminal of the battery to prevent electrical issues.

Step 4: Locate Motor Mounts

1. Identify the Mounts: There are typically three motor mounts:
   • Passenger side motor mount
   • Driver side motor mount
   • Lower engine mount
2. Refer to Video Links: For more specific guidance on each mount, check out the links provided in the video description.

Step 5: Remove Old Motor Mounts

1. Loosen Mount Bolts: Use your socket set to loosen and remove the bolts securing the motor mounts.
2. Support the Engine: If necessary, use an engine support brace to hold the engine in place while you remove the mounts.
3. Remove the Mounts: Carefully lift out the old motor mounts from their positions.

Step 6: Install New Motor Mounts

1. Position New Mounts: Align the new motor mounts in their respective places.
2. Secure Mounts: Hand-tighten the bolts at first, then use a torque wrench to tighten them to the manufacturer's specifications.
3. Check Alignment: Ensure the mounts are properly aligned before fully tightening.

Step 7: Reassemble and Test

1. Reinstall Components: Put back any engine covers and reconnect the battery.
2. Lower the Vehicle: Remove the jack stands and lower the vehicle back to the ground.
3. Start the Engine: Run the engine to check for vibrations and ensure everything is functioning properly.

Conclusion

Replacing the motor mounts on a 2018 Hyundai Elantra can significantly improve the vehicle's performance and comfort. By following these steps, you can successfully complete the job yourself. If you encounter any issues or have questions, feel free to refer back to the video or consult a professional mechanic. Happy repairing!