Honda/Acura Brake Lights Won’t Turn Off? Easy Fix in Minutes!

Introduction

If your Honda or Acura's brake lights stay on and drain the battery, you can fix it easily at home without needing a mechanic. This common issue affects many models from Honda and Acura, spanning decades. This guide will walk you through the simple steps to resolve the problem quickly.

Step 1: Identify the Issue

• Check if your brake lights are remaining illuminated even when the car is off.
• Confirm that this issue is not due to a malfunctioning brake light switch, which can often be the culprit.

Practical Tip: If the lights are on, try pressing the brake pedal several times to see if they turn off. If they don’t, proceed to the next step.

Step 2: Gather the Necessary Parts

• You will need a replacement brake pedal switch. A recommended part is the Dorman Brake Pedal Accelerator Stop, which can be found online.

Common Pitfall: Ensure the replacement part is compatible with your specific Honda or Acura model by checking the model year.

Step 3: Access the Brake Pedal Switch

• Locate the brake pedal under the dashboard of your vehicle.
• Remove any covers or panels that may obstruct access to the brake pedal switch.

Practical Tip: Use a flashlight to help see better in tight or dark spaces.

Step 4: Remove the Old Brake Pedal Switch

• Disconnect the wiring harness from the old brake pedal switch.
• Unscrew or unclip the switch from its mounting point. This may vary depending on the model, so consult your vehicle’s manual if necessary.

Step 5: Install the New Brake Pedal Switch

• Position the new brake pedal switch in the same location as the old one.
• Secure it by screwing it back in or clipping it into place.
• Reattach the wiring harness to the new switch.

Step 6: Test the Brake Lights

• Turn on your vehicle and press the brake pedal to check if the brake lights function correctly.
• Make sure the lights turn off when the pedal is not pressed.

Practical Tip: If the lights still do not turn off, double-check the installation of the new switch and the wiring.

Conclusion

You have now successfully replaced the brake pedal switch, which should resolve the issue of your brake lights staying on. Regular maintenance checks can prevent similar issues in the future. If problems persist, consider consulting a mechanic for further diagnostics. Enjoy your DIY success!