How to Remove a 2015-2017 Nissan Juke Front Bumper Cover, Part 1/3

Introduction

This tutorial provides step-by-step instructions for removing the front bumper cover from a 2015-2017 Nissan Juke. Whether you're replacing the bumper or conducting repairs, this guide will help you complete the task efficiently.

Step 1: Prepare Your Workspace

• Park the vehicle on a flat surface and engage the parking brake.
• Pop open the hood to access the necessary components.

Step 2: Gather Required Tools

Ensure you have the following tools ready:

• Flat-head screwdriver
• Phillips screwdriver
• 10mm wrench or socket wrench
• Panel clip remover (optional)

Step 3: Remove Bottom Bumper Screws

• Locate the screws securing the bottom of the bumper cover.
• Use the appropriate screwdriver to remove these screws.
• Keep all fasteners organized to avoid losing them.

Step 4: Remove Fender Trim and Bolts Underneath

• Start with the push-pin clips in the fender well:
  • Use the flat-head screwdriver or panel clip remover to gently pry them out.
• Next, remove the 10mm bolt located under the fender molding:
  • Use your ratchet with a 10mm socket to unscrew this bolt.
• Repeat this process on the opposite side.

Step 5: Remove Top Bumper Clips

• Locate the clips securing the top of the bumper.
• Carefully pull these clips out to release the bumper from its attachments.

Step 6: Detach the Front Bumper

• Firmly pull the bumper away from the fender, ensuring you do not yank it:
  • The bumper is attached to a bracket, so a gentle pull is necessary to avoid breaking it.
• If the bumper is wedged under the fog lights, gently pry it out.

Step 7: Disconnect Fog Lights

• Before completely removing the bumper, disconnect the fog lights:
  • Most wire harnesses require pressing down on the tab to release, but for the Juke, pull the tab up to disconnect.
• Ensure the bumper is supported to prevent it from dropping.

Conclusion

Removing the front bumper cover of a 2015-2017 Nissan Juke involves systematically unscrewing and detaching various components. By following these steps, you can safely remove the bumper for repair or replacement. After removal, consider inspecting other components that may need attention. If you're planning to reinstall the bumper, make sure to keep all fasteners organized for a smooth process.