HP CP2025 - How to Replace the Pick-up Rollers and Separation Pad (CM2320, M351, M375, M451, M475)
2 min read
6 months ago
Published on Apr 24, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Title: How to Replace the Pick-up Rollers and Separation Pad on HP Color LaserJet CP2025
- Put the printer into menu mode by pressing the OK button.
- Press the left side arrow and then the cancel button simultaneously, but press the left side arrow a bit quicker than the cancel button.
- Press the OK button again and navigate to the secondary service mode by pressing OK.
- Use the arrow buttons to scroll until you find the pick roller option and press OK.
- Wait for the light to start flashing, indicating the need to replace the roller or turn the printer off and on.
- To safely work on the machine, pull the plug out of the machine to freeze the roller in position.
- Rotate the printer onto its back to access the pick-up roller and separation pad.
- Release the pick-up roller by moving the two white tabs to the side and pulling it forward.
- Remove the separation roller by pushing it out with a flathead screwdriver.
- Slide the new separation roller into place.
- Install the pick-up roller by aligning the larger notch with the grooves at the bottom and rotating it forward.
- Slide the tray back in place.
- Plug the machine back in and power it on.
- The roller will reset itself, indicating successful replacement.
- Your HP Color LaserJet CP2025 is now ready to use with the new pick-up roller and separation pad.