Jeep Wrangler JK Sony XAV-AX6000 Plug & Play Kit Installation | 2007 - 2018 Jeep Wrangler JK

Introduction

This tutorial guides you through the installation of the Sony XAV-AX6000 plug-and-play kit in a 2007 - 2018 Jeep Wrangler JK. The Sony XAV-AX6000 features a 6.95" capacitive touchscreen with wireless Apple CarPlay and Android Auto, elevating your in-car technology experience. Whether you're upgrading your sound system or enhancing connectivity, this step-by-step guide will help you complete the installation efficiently.

Step 1: Gather Your Tools and Equipment

Before you begin the installation, ensure you have the following items ready:

• Sony XAV-AX6000 head unit
• Plug-and-play wiring harness
• Dash kit specific for Jeep Wrangler JK
• Basic tools (screwdriver set, trim removal tool, socket wrench)
• Optional: Electrical tape for additional wiring security

Step 2: Remove the Factory Head Unit

Follow these steps to safely remove your existing head unit:

1. Disconnect the Battery

   • Locate the battery under the hood and disconnect the negative terminal to prevent any electrical shorts.

2. Remove the Dash Trim

   • Use a trim removal tool to gently pry off the dashboard trim surrounding the head unit. Take your time to avoid breaking the clips.

3. Unscrew the Factory Head Unit

   • Locate the screws holding the factory head unit in place and remove them using a screwdriver. Keep the screws in a safe place for later use.

4. Disconnect Wiring Harness

   • Carefully pull the factory head unit out and disconnect the wiring harness and antenna cable from the back.

Step 3: Install the Sony XAV-AX6000

Now that the factory unit is out, follow these steps to install the new head unit:

1. Connect the Wiring Harness

   • Use the provided plug-and-play wiring harness to connect the Sony XAV-AX6000 to your Jeep's wiring. Match colors accordingly to ensure proper connections.

2. Attach the Antenna

   • Connect the antenna cable to the back of the Sony XAV-AX6000.

3. Secure the Head Unit

   • Carefully slide the head unit into the dash kit and secure it using the screws you previously removed.

Step 4: Reattach the Dash Trim

After securing the head unit, follow these steps:

1. Reinstall the Trim

   • Press the dashboard trim back into place, ensuring all clips are properly seated.

2. Reconnect the Battery

   • Reconnect the negative terminal of the battery under the hood.

Step 5: Test the Head Unit

Before finishing up, ensure everything works correctly:

1. Power On the Head Unit

   • Turn on your Jeep and test the Sony XAV-AX6000 to ensure it powers on.

2. Check Features

   • Test wireless Apple CarPlay and Android Auto connectivity, along with other features like Bluetooth and radio functionality.

Conclusion

Congratulations on successfully installing the Sony XAV-AX6000 in your Jeep Wrangler JK! You've upgraded your vehicle with modern technology, enhancing your driving experience. If you encounter any issues, refer to the user manual or reach out for support. Enjoy the new features and happy driving!