How to Make the Ultimate Survival Pull Pin Firestarter – 15 Min Burn!

Introduction

In this tutorial, you will learn how to create an ultimate pull-pin firestarter that provides reliable ignition in just seconds. With a burn time of up to 15 minutes, this firestarter is perfect for camping, bushcraft, or emergency survival kits. Whether you’re an outdoor enthusiast or preparing for unforeseen situations, this DIY project is easy to follow and essential for your survival toolkit.

Step 1: Gather Your Materials

To create your pull-pin firestarter, you will need the following materials:

• Cotton balls - for the ignition base
• Paraffin wax - to increase burn time
• Cardboard - as a mold for your firestarter
• Pull pins - to act as the ignition mechanism
• Tin can - for melting wax
• Double boiler - or a makeshift one to melt wax safely
• Scissors - for cutting materials
• Heat-resistant gloves - for safety while handling hot materials

Step 2: Prepare the Wax Mixture

Follow these steps to prepare your wax mixture:

1. Melt the paraffin wax:

   • Fill the bottom pot of the double boiler with water.
   • Place the tin can inside the pot, ensuring it doesn’t touch the bottom.
   • Heat the water on the stove until the wax inside the can melts completely.

2. Combine with cotton:

   • Once melted, remove the can from heat.
   • Submerge cotton balls into the melted wax, ensuring they are fully coated.

3. Create a mold:

   • Take a piece of cardboard and cut it into desired shapes (e.g., squares or rectangles).
   • Lay the coated cotton balls onto the cardboard.

Step 3: Insert the Pull Pins

To add the ignition mechanism:

1. Position the pull pins:

   • While the wax is still warm, insert a pull pin into each cotton ball.
   • Ensure that the pin is securely placed for easy ignition.

2. Let it cool:

   • Allow the wax and cotton mixture to cool completely. This hardens the firestarter and secures the pull pin.

Step 4: Test Your Firestarter

It’s important to ensure your firestarter works effectively:

1. Prepare a safe ignition area:

   • Find a fire-safe location outdoors, away from flammable materials.

2. Ignite the firestarter:

   • Pull the pin out swiftly to ignite the cotton.
   • Observe how the firestarter burns and ensure it lasts for the desired time.

Conclusion

You have now created your ultimate pull-pin firestarter, ready for any survival situation. This project not only equips you with a reliable fire-starting tool but also enhances your skills in DIY survival preparations. Store your firestarters in your camping gear, bushcraft kit, or emergency supplies. For further outdoor survival tips and projects, consider subscribing to relevant channels for more insights.