How to Change the Code on a Lockey Digital Push Button Lock

Introduction

Changing the code on a Lockey digital push button lock is a straightforward process that enhances security for your gates or cabinets. This tutorial will guide you through the steps to successfully change the code, ensuring that your lock remains secure and functional.

Step 1: Understand the Lockey Lock

• Identify your Lockey lock by looking for the "Lockey" or "Digital" label.
• Familiarize yourself with the limitations of the new lock code:
  • Codes should typically be a predetermined length (usually 4 to 8 digits).
  • Avoid using easily guessable combinations like "1234" or "0000".

Step 2: Put the Lock in Clear Mode

• To begin the process, place the lock in clear mode:
  • Press and hold the "C" button until it beeps.
  • This indicates that the lock is ready to accept a new code.

Step 3: Remove the Cover Plate

• Use a screwdriver to carefully remove the cover plate of the lock.
• Ensure you keep the screws in a safe place to avoid losing them during the process.

Step 4: Understand the Color Wafers

• The Lockey lock uses color-coded wafers to indicate different settings:
  • Familiarize yourself with what each color means to ensure you are configuring the lock correctly.
• Check the lock's manual for specific wafer configurations.

Step 5: Replace the Lockey Wafers

• If needed, replace the wafers to set the new code:
  • Gently remove the existing wafers with a small tool.
  • Insert the new wafers according to your desired code configuration.
• Ensure that the wafers are properly seated to prevent any operational issues.

Step 6: Test the New Code

• After setting your new code, reassemble the lock cover plate.
• Lock and unlock the lock using the new code to ensure it functions as intended.
• If the lock does not operate correctly, double-check the wafer configurations and repeat the process if necessary.

Conclusion

Changing the code on your Lockey digital push button lock is essential for maintaining security. By following these steps—understanding your lock, entering clear mode, replacing wafers, and testing your new code—you can ensure your lock operates smoothly. For further assistance, consider consulting the lock's manual or reaching out to a locksmith if you encounter any issues.