How To Tie A Decorative Paracord Diamond Knot/Knife Lanyard Knot

Introduction

This tutorial will guide you through the process of tying a decorative paracord diamond knot, also known as the knife lanyard knot. This ornamental knot serves various purposes, including as a stylish addition to knife lanyards, paracord jewelry, and survival bracelets. By following these step-by-step instructions, you'll be able to create a functional and attractive knot.

Step 1: Gather Your Materials

Before you start tying the knot, ensure you have the following materials ready:

• Paracord (length depends on your project)
• Scissors
• Lighter (for sealing the ends of the paracord)
• Surface to work on

Step 2: Prepare the Paracord

1. Cut the Paracord: Measure and cut a length of paracord. A good starting length is around 4-5 feet.
2. Seal the Ends: Use the lighter to slightly melt the ends of the paracord. This prevents fraying and keeps the cord intact.

Step 3: Create the Initial Loop

1. Form a Loop: Take one end of the paracord and create a loop, leaving enough cord on the end to work with.
2. Insert the Other End: Take the other end of the paracord and pass it through the loop from behind.

Step 4: Tie the Carrick Bend

1. Position the Cord: Adjust the lengths of the two ends of the paracord so they are even.
2. Wrap the Ends: Cross the right end over the left end and then tuck it underneath.
3. Complete the Bend: Pull both ends to tighten the knot and secure the loop.

Step 5: Begin Forming the Diamond Knot

1. Create Two Loops: With the working ends, create two loops around the initial knot, one on top of the other.
2. Weave the Ends: Take the right working end and weave it behind the left loop, then up through the center of the knot.

Step 6: Finalize the Diamond Knot

1. Pull Tight: Pull on all four ends of the paracord to tighten the knot. Ensure the diamond shape is formed properly.
2. Adjust the Knot: Make any necessary adjustments to the loops to maintain an even shape.

Step 7: Cut and Seal the Ends

1. Trim Excess Cord: If necessary, trim any excess paracord from the ends of the knot.
2. Seal the Ends Again: Use the lighter to melt the ends of the paracord to prevent fraying.

Conclusion

You have successfully tied a decorative paracord diamond knot! This knot not only looks great but also serves practical purposes, whether as part of a lanyard, bracelet, or other decorative items. Practice tying this knot to gain proficiency, and consider exploring other knots such as the Carrick bend or the Chinese button knot for more variety in your knot-tying skills. Happy knotting!