Replacing the Rear Window on a Kia Soul

2 min read 1 month ago
Published on Aug 01, 2024 This response is partially generated with the help of AI. It may contain inaccuracies.

Table of Contents

Introduction

This tutorial will guide you through the process of replacing the rear driver-side window on a Kia Soul. Whether you've experienced a break-in or simply need to replace a damaged window, this step-by-step guide will help you complete the task efficiently.

Step 1: Prepare the Work Area

  • Remove any plastic covering from the broken window.
  • Clean up any residue from tape or glue that may be left on the door.

Step 2: Remove the Door Panel

  • Use a flathead screwdriver or a non-marring pry tool to carefully pop off the plastic panel.
  • Locate and remove the Phillips screws securing the door panel:
    • Use a pick tool to access hidden screws.
    • Unscrew the visible Phillips screws.

Step 3: Disconnect Wiring

  • Carefully pry the door panel away from the door to access the wiring.
  • Disconnect the cables for the door handle and window switch:
    • Push in on the clips to release the cables.

Step 4: Remove the Inner Door Panel

  • Locate and loosen the bolts holding the inner panel:
    • Use a T30 or 10mm socket to remove bolts around the perimeter.
  • Carefully pull away the inner panel to access the window regulator and clean out any glass fragments.

Step 5: Install the New Window

  • Position the new window inside the door:
    • Insert the bottom edge of the glass first and align it with the track.
    • Feed it up into the track and secure it in place.
  • Use bolts to secure the window to the regulator.

Step 6: Reassemble the Door Panel

  • Reconnect all wiring and cables to the door panel.
  • Align the door panel with the clips and press it into place until you hear them snap.
  • Reinstall screws to secure the door panel.
  • Replace any plastic caps and covers that were removed earlier.

Conclusion

Congratulations! You've successfully replaced the rear window on a Kia Soul. Make sure to clean up any leftover glass and test the window functionality before finishing. If you encounter any difficulties, consult your vehicle's service manual or seek professional assistance.