Посудомойка не сливает воду. Что делать?
2 min read
3 days ago
Published on Mar 28, 2025
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
In this tutorial, we will address common issues when a Bosch, Siemens, or Neff dishwasher fails to drain water. This guide will provide step-by-step instructions on what to check and how to resolve the issue effectively.
Step 1: Check for Blockages in the Drain Filter
- Locate the drain filter, usually found at the bottom of the dishwasher.
- Remove the filter by turning it counterclockwise or pulling it straight out (depending on the model).
- Inspect for food debris, grease, or any other blockages.
- Clean the filter under running water with a soft brush or cloth to ensure it is free from obstructions.
- Reinsert the filter securely.
Step 2: Inspect the Drain Hose
- Find the drain hose connected to the back of the dishwasher and the sink or garbage disposal.
- Ensure the hose is not kinked or pinched, as this can prevent proper drainage.
- Detach the hose and check for any clogs or blockages inside.
- Clean the hose using a long brush or by flushing it with water.
- Reconnect the hose, ensuring it is properly secured.
Step 3: Check the Sump Area
- Remove the lower spray arm to access the sump area.
- Look for any debris or foreign objects lodged in the sump that may block water flow.
- Clear out any obstructions carefully.
- Ensure the area is clean and reassemble any parts you removed.
Step 4: Test the Drain Pump
- Listen for the sound of the drain pump when you run a cycle and it should activate during the drain phase.
- If you cannot hear the pump, it could be malfunctioning.
- You may need to consult the user manual for specific testing instructions or consider contacting a technician if you suspect a pump failure.
Step 5: Reset the Dishwasher
- Sometimes a simple reset can resolve electronic glitches.
- To reset, turn off the dishwasher and unplug it from the power source.
- Wait for about 5-10 minutes before plugging it back in and turning it on.
- Run a short cycle to see if the issue has been resolved.
Conclusion
By following these steps, you can troubleshoot and potentially fix the draining issue in your Bosch, Siemens, or Neff dishwasher. If problems persist after these checks, it may be time to consult a professional service. Remember to always handle electrical components with care and refer to your user manual for model-specific guidance.