Dissassembling Cleaning and Regreasing Covered Vintage Fender Tuners
2 min read
4 months ago
Published on Apr 21, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
How to Disassemble, Clean, and Regrease Covered Vintage Fender Tuners
Materials Needed:
- Screwdriver
- Toothbrush
- Q-tips or cotton swabs
- Naphtha or oil-based cleaning agents
- White lithium grease
- Parts tray
- Shop towel
- Toothpick or plastic butter knife
Step 1: Loosen the Strings
- Begin by loosening the strings on the guitar to make it easier to work on the tuners.
Step 2: Remove the Tuner
- Use a screwdriver to remove the screws holding the tuner in place.
- Gently pull the tuner off, taking care not to damage the finish of the guitar.
Step 3: Clean the Tuner
- Use a toothbrush and oil-based cleaning agent to remove any dirt, grease, or metal shavings from the tuner gears.
- Use a toothpick or plastic butter knife to clean hard-to-reach areas.
Step 4: Regrease the Tuner
- Apply white lithium grease to the gears of the tuner, ensuring they are well lubricated.
- Reassemble the tuner, making sure to orient it correctly for your guitar's headstock.
Step 5: Reassemble the Tuner
- Place the tuner back on the guitar and secure it with the screws.
- Wipe off any excess grease with a clean rag to prevent it from seeping into the wood.
Step 6: Test the Tuner
- Tune the guitar to check if the tuner moves smoothly without any stiffness.
- Adjust as needed until the tuner functions properly.
Step 7: Final Checks
- Ensure the strings are properly positioned on the bridge.
- Play the guitar to ensure the tuners are working smoothly.
By following these steps, you can effectively disassemble, clean, and regrease covered vintage Fender tuners to maintain their functionality and prolong their lifespan.