Roof Rack Installation on a Bare Roof - Thule Evo Clamp WingBar *How To, Overview and Install

How to Install Thule Roof Racks on a Bare Roof

1. Gather Your Materials:

   • Thule WingBar Evo 135
   • Thule Evo Clamp
   • Fit Kit for your specific car model (e.g., 2006 Prius)
   • Measuring tape
   • Instructions provided in the kit

2. Prepare the Wing Bars:

   • Separate the fused pieces of the wing bar.
   • Assemble the wing bars by aligning the grooves and arrows, ensuring a snug fit.
   • Label each piece according to the instructions provided.

3. Attach the Fit Kit:

   • Identify the corresponding numbers for each piece based on the instructions.
   • Attach the fit kit components to the underside of the wing bars, ensuring a secure fit.

4. Position the Bars:

   • Determine the correct placement of the bars on your car roof (front, back, left, right).
   • Ensure the bars are facing the right direction (fat end towards the front of the car).

5. Secure the Bars:

   • Press down on the clamps to lock them into place on the roof.
   • Use fillers to ensure a snug fit and make adjustments if needed for a flat and secure attachment.

6. Adjust Measurements:

   • Follow the measurements provided in the instructions to position the bars correctly.
   • Use a measuring tape to verify the distance between the bars and make adjustments as necessary.

7. Finalize Installation:

   • Install the back part of the roof rack by measuring and adjusting the placement.
   • Double-check all measurements and tighten the clamps evenly on each side for a secure fit.

8. Lock the Roof Racks:

   • Use the provided locks to secure the wing bars in place.
   • Insert the key into the lock, find the correct position, and lock it securely.

9. Complete Installation:

   • Ensure all components are properly installed and secured.
   • Verify that the roof racks are correctly positioned and locked in place.

10. Final Check:

    • Before driving, give a final inspection to ensure everything is securely in place.
    • Test the stability of the roof racks by gently shaking them.

Congratulations! You have successfully installed Thule roof racks on your bare roof following these steps. Enjoy your enhanced car storage capacity!