CARA MEMBUAT SABUN ORGANIK DAUN KELOR

Introduction

This tutorial provides a step-by-step guide on how to create organic soap using moringa leaves. This natural soap is beneficial for skin health, helping with issues such as acne, dark spots, and overall skin hydration. Using pure oils and dried moringa extract, this cold process soap avoids harmful chemicals found in many commercial products.

Step 1: Gather Your Ingredients and Tools

Before you start, ensure you have all necessary materials ready. Here’s what you will need:

Ingredients

• Dried moringa leaves (finely powdered)
• Pure oils (e.g., olive oil, coconut oil, palm oil)
• Lye (sodium hydroxide)
• Distilled water
• Optional: essential oils for fragrance

Tools

• Scale for measuring
• Mixing bowls
• Stick blender
• Soap mold
• Safety gear (gloves, goggles)
• Thermometer

Step 2: Prepare the Lye Solution

Working with lye requires caution. Follow these steps to prepare the lye solution safely:

1. Measure the Water: Use distilled water for the best results.
2. Measure the Lye: Carefully measure the lye using the scale.
3. Mix: Slowly add the lye to the water (never the other way around) while stirring gently. This mixture will heat up; allow it to cool down to around 100°F (37°C).

Step 3: Combine Oils

While the lye solution cools, prepare your oils:

1. Weigh Oils: Measure the required amount of each oil.
2. Heat Oils: Gently heat the oils until they reach about 100°F (37°C).
3. Mix in Moringa: Add the powdered moringa leaves to the oils and mix thoroughly.

Step 4: Blend Lye Solution and Oils

Once both the lye solution and oils are at the same temperature:

1. Combine: Slowly pour the lye solution into the oils.
2. Blend: Use a stick blender to mix until you reach a light trace (the mixture should thicken slightly).
3. Add Essential Oils: If using, add any essential oils for fragrance and blend again.

Step 5: Pour into Mold

After blending:

1. Pour Mixture: Carefully pour the soap mixture into the mold.
2. Tap Mold: Gently tap the mold to remove any air bubbles.

Step 6: Curing the Soap

Allow the soap to harden:

1. Cover Mold: Cover the mold with a towel to insulate it.
2. Wait: Let the soap sit for 24 hours. If it’s not hard enough, leave it for an additional 3 hours.
3. Unmold: After it hardens, carefully remove the soap from the mold and cut it into bars.

Step 7: Curing Process

To ensure the soap lasts longer:

1. Cure the Soap: Place the cut bars in a cool, dry, and well-ventilated area for at least 4 weeks.
2. Avoid Direct Sunlight: Keep them out of direct sunlight to prevent damage.

Conclusion

You now have your very own organic moringa soap! Remember, the longer you let the soap cure, the harder and more effective it will become. This soap is ideal for sensitive skin and can help with various skin issues. Enjoy the benefits of your homemade product, and feel free to experiment with different oils or scents in future batches!