Cara Menyambung Kabel Fiber Optik Menggunakan Splicer (Dropcore, Patchcord, Pigtail)

Introduction

This tutorial provides a step-by-step guide on how to splice fiber optic cables using a fusion splicer. Specifically, it covers connecting dropcore to dropcore, dropcore to patchcord, and core to pigtail. Whether you're a beginner or looking to refine your skills, this guide will help you perform fiber optic splicing effectively.

Step 1: Prepare Your Tools and Materials

Before starting the splicing process, gather the necessary tools and materials:

• Fusion Splicer (e.g., Tarmoc TFT-0612X)
• Fiber Optic Cables: Dropcore, patchcord, and pigtail
• Fiber Stripper
• Cleaver
• Isopropyl Alcohol and Lint-Free Wipes for cleaning
• Protective Gear: Safety glasses and gloves

Tips

• Ensure your workspace is clean and well-lit.
• Double-check that all tools are functioning properly.

Step 2: Splicing Dropcore to Dropcore

To splice two dropcore cables together, follow these steps:

1. Strip the Fiber:

   • Use the fiber stripper to remove the outer jacket of both cables.
   • Strip about 2-3 inches of the fiber.

2. Clean the Fiber:

   • Wipe the stripped fiber with isopropyl alcohol and a lint-free wipe to remove any debris.

3. Cleaving the Fiber:

   • Place the fiber in the cleaver and make a clean cut. This ensures a proper connection.

4. Load the Fiber into the Fusion Splicer:

   • Insert the prepared fibers into the splicer.
   • Follow the splicer’s instructions to align the fibers correctly.

5. Splice the Fibers:

   • Initiate the splicing process on the machine.
   • Wait for the splicer to complete the fusion process.

Common Pitfalls to Avoid

• Ensure fibers are aligned perfectly to avoid signal loss.
• Do not touch the cleaved ends with your fingers.

Step 3: Splicing Dropcore to Patchcord

To connect a dropcore cable to a patchcord, use the following method:

1. Repeat the Stripping and Cleaving Process:

   • Strip and clean both the dropcore and patchcord fibers.
   • Make sure both fibers are cleaved properly.

2. Align the Fibers in the Splicer:

   • Insert both fibers into the splicer, ensuring they are correctly aligned.

3. Perform the Fusion Splicing:

   • Start the splicing process and wait for the machine to complete the operation.

Practical Advice

• Use a patchcord that matches the specifications of your dropcore to ensure compatibility.

Step 4: Splicing Core to Pigtail

For connecting a core to a pigtail, follow these steps:

1. Prepare the Fibers:

   • Strip and cleave the core and pigtail fibers as previously described.

2. Insert into the Fusion Splicer:

   • Place the fibers into the splicer, ensuring proper alignment.

3. Execute the Splicing:

   • Activate the splicer and monitor until the process is complete.

Important Notes

• Pigtails are typically shorter and should be handled with care to avoid breaks.

Conclusion

In this tutorial, you learned how to splice fiber optic cables, including connections between dropcore, patchcord, and pigtail. Remember to always maintain a clean workspace and handle the fibers carefully to ensure optimal performance. For further practice, consider experimenting with different types of fiber optic cables to enhance your skills.