KONFIGURASI INTERNET DI MIKROTIK ROUTERBOARD RB941-2nd || TUGAS 1

Introduction

This tutorial will guide you through configuring internet settings on a MikroTik RouterBoard RB941-2nd. By following these steps, you will ensure that your router is properly set up to connect to the internet, allowing for efficient network management and connectivity.

Step 1: Access the Router's Interface

1. Connect your computer to the MikroTik RouterBoard using an Ethernet cable.
2. Open your web browser and enter the router's default IP address, typically 192.168.88.1.
3. Log in with the default credentials:
   • Username: admin
   • Password: (leave blank)

Step 2: Set Basic Configuration

1. Navigate to the QuickSet tab.
2. Select the Internet connection type:
   • DHCP Client for dynamic IP addresses.
   • Static IP if you have a fixed IP from your ISP.
3. For DHCP Client:
   • Click on Apply Configuration.
4. For Static IP:
   • Enter the following details:
     • IP Address
     • Gateway
     • DNS Server
   • Click on Apply Configuration.

Step 3: Configure NAT for Internet Access

1. Go to the IP menu and select Firewall.
2. Click on the NAT tab.
3. Click the Add button (+) to create a new NAT rule.
4. Set the following parameters:
   • Chain: srcnat
   • Out. Interface: Select your WAN interface (usually ether1).
   • Under the Action tab, select masquerade.
5. Click OK to save the rule.

Step 4: Set Up DHCP Server for Local Network

1. Navigate to the IP menu and select DHCP Server.
2. Click on the DHCP Setup button.
3. Select the interface where you want to run the DHCP server (usually bridge or ether2).
4. Follow the prompts to configure the DHCP settings:
   • Set the address space (e.g., 192.168.88.0/24).
   • Define the gateway and DNS server settings.
   • Click Next until you finish the setup.

Step 5: Test Internet Connection

1. Connect a device to the router (via Ethernet or Wi-Fi).
2. Open a web browser on the connected device.
3. Try accessing a website to confirm internet connectivity.

Conclusion

You have successfully configured your MikroTik RouterBoard RB941-2nd for internet access. Ensure that your settings are saved and backed up for future reference. As a next step, consider exploring additional security measures, such as setting up a firewall or configuring VPN access, to enhance your network's security.