How to unjam a GBC Ultima 65 laminator!

Introduction

This tutorial will guide you through the process of unjamming a GBC Ultima 65 laminator. If your laminator has become stuck or is not feeding properly, following these steps will help you quickly resolve the issue and get back to laminating your important documents.

Step 1: Turn Off the Laminator

• Locate the power switch on the laminator.
• Switch it off to ensure safety while you deal with the jam.

Step 2: Unplug the Laminator

• Disconnect the power cord from the electrical outlet.
• This step is crucial to prevent accidental activation while you are working on the machine.

Step 3: Open the Laminator

• Gently open the laminator to access the rollers.
• Depending on the model, this might involve pressing a release button or lifting the top cover.

Step 4: Inspect for Jammed Materials

• Look closely at the rollers and the feed area.
• Identify any visible signs of paper or film that may be stuck.

Step 5: Remove Jammed Materials

• Carefully pull out any jammed materials.
• If the material is tightly stuck, do not force it. Instead, gently wiggle it free.

Step 6: Check the Rollers

• Examine the rollers for any debris or residue.
• Clean the rollers with a soft cloth to ensure they are free of any adhesive or film that could cause future jams.

Step 7: Close the Laminator

• Once you have removed the jam and cleaned the rollers, close the laminator securely.
• Ensure that all parts are correctly aligned and locked into place.

Step 8: Plug in and Test the Laminator

• Reconnect the power cord to the electrical outlet.
• Turn on the laminator and allow it to heat up as per the manufacturer's instructions.

Step 9: Run a Test Sheet

• Feed a test sheet through the laminator to check if it operates smoothly.
• If it works without any issues, you are ready to laminate your documents.

Conclusion

Unjamming your GBC Ultima 65 laminator is a straightforward process that can be completed in just a few steps. Remember to always power off and unplug the machine before starting any maintenance. If jams continue to occur, consider reviewing the type of materials being used or consult the user manual for further troubleshooting tips. Happy laminating!