Chuveiro nao esquenta. Resistencia nao queimou. Nao compre outro chuveiro

Introduction

In this tutorial, we will address the issue of a shower that is not heating water despite the heating element appearing intact. Many people may be tempted to purchase a new shower unit, but there are simpler solutions to explore first. This guide will walk you through troubleshooting your existing shower to identify and fix the problem.

Step 1: Check the Power Supply

Before diving into more complex troubleshooting, ensure that your shower is receiving power.

• Inspect the Circuit Breaker:

  • Locate your home’s circuit breaker panel.
  • Check for any tripped breakers and reset them if necessary.

• Verify the Power Connection:

  • Ensure that the shower is properly connected to the power supply.
  • Look for any loose or damaged wires.

Step 2: Test the Thermostat

The thermostat regulates the water temperature. If it’s malfunctioning, it can cause heating issues.

• Access the Thermostat:

  • Turn off the power supply to the shower.
  • Remove the cover to access the thermostat.

• Check for Faults:

  • Inspect for any visible damage or corrosion.
  • Use a multimeter to test the thermostat for continuity. If it fails, it may need replacement.

Step 3: Inspect the Heating Element

Even if the heating element appears intact, it might still be faulty.

• Remove the Heating Element:

  • Again, ensure the power is off before attempting this step.
  • Disconnect the heating element from the shower unit.

• Test the Heating Element:

  • Use a multimeter to check for continuity.
  • If there’s no continuity, the heating element is defective and should be replaced.

Step 4: Look for Mineral Build-Up

Mineral deposits can significantly affect heating efficiency.

• Check for Blockages:

  • Inspect the showerhead and any visible pipes for mineral build-up.

• Clean the Affected Parts:

  • Use a mixture of vinegar and water to soak the affected areas.
  • Scrub away any deposits, then rinse thoroughly.

Step 5: Reassemble and Test

Once you have completed the checks and any necessary repairs, it’s time to put everything back together.

• Reassemble the Shower:

  • Replace any components you removed.
  • Ensure all connections are tight and secure.

• Restore Power and Test:

  • Turn the power back on.
  • Test the shower to see if it heats correctly.

Conclusion

By following these steps, you can troubleshoot and potentially fix a shower that is not heating properly without the need to purchase a new unit. Always remember to prioritize safety by turning off power before working on electrical components. If these steps do not resolve the issue, consider consulting a professional for further assistance. With a bit of patience and careful inspection, you can restore your shower's functionality.