How to Change Oil and Filter Hyundai Tucson 2022-2025 2.5L | With Sizes and Torque Specs!

Introduction

This tutorial will guide you through the process of changing the oil and filter in a 2022-2025 Hyundai Tucson with a 2.5L engine. Regular oil changes are crucial for maintaining your vehicle's performance and extending its lifespan. This task is straightforward and can be performed in your own garage or driveway with just a few tools.

Step 1: Gather Your Supplies

Before you start, ensure you have all the necessary tools and materials:

• Engine Oil: 0W-20 synthetic oil (check the owner's manual for specifics)
• Oil Filter: Compatible with Hyundai Tucson 2.5L
• Socket Set: Including a 27mm socket
• Oil Drain Pan: To catch the old oil
• Funnel: For pouring new oil
• Rags or Paper Towels: For cleanup
• Safety Gear: Gloves and safety glasses

Step 2: Prepare Your Vehicle

• Park your Hyundai Tucson on a level surface to ensure proper drainage.
• Turn off the engine and allow it to cool down for at least 15-20 minutes.
• Engage the parking brake and, if necessary, raise the vehicle using jack stands for better access.

Step 3: Drain the Old Oil

1. Locate the oil drain plug under the vehicle.
2. Position the oil drain pan beneath the drain plug.
3. Use a 27mm socket to loosen and remove the drain plug.
4. Allow the old oil to completely drain into the pan. This may take several minutes.

Step 4: Replace the Oil Filter

1. Locate the oil filter, usually found near the oil pan.
2. Use an oil filter wrench to remove the old filter.
3. Before installing the new filter, apply a small amount of new oil to the rubber gasket of the new filter. This helps create a better seal.
4. Install the new oil filter by hand, tightening it until secure (do not overtighten).

Step 5: Reinstall the Drain Plug

1. Once the old oil has drained, replace the drain plug.
2. Tighten the drain plug securely using the 27mm socket, but do not overtighten to avoid stripping the threads.

Step 6: Add New Oil

1. Open the hood and locate the oil filler cap.
2. Remove the cap and place a funnel in the opening.
3. Pour in the new 0W-20 oil, following the amount specified in your vehicle's owner manual (typically around 5 to 6 quarts).
4. Replace the oil filler cap.

Step 7: Check the Oil Level

1. Start the engine and let it run for a minute. This allows the new oil to circulate.
2. Turn off the engine and wait a few minutes.
3. Use the dipstick to check the oil level. Remove the dipstick, wipe it clean, reinsert it, and then remove it again to check the level. Add more oil if necessary.

Step 8: Dispose of Old Oil and Filter

• Properly dispose of the old oil and oil filter. Many auto parts stores and recycling centers accept used oil for recycling.

Conclusion

Changing the oil and filter in your Hyundai Tucson is a manageable task that can save you time and money. Regular maintenance ensures your engine runs smoothly and efficiently. Remember to keep track of your oil change schedule according to your vehicle's maintenance guide. If you have any questions or need further assistance, feel free to seek help from automotive forums or local mechanics.