2017-2023 Honda Ridgeline Rear Brake Rotor Pads Replacement

Introduction

This tutorial will guide you through the process of replacing the rear brake rotor pads on a 2017-2023 Honda Ridgeline. This procedure is relevant for models equipped with rear drum parking brakes and is similar to some Acura MDX and Honda Pilot models. Follow these steps to ensure a successful and safe brake pad replacement.

Step 1: Gather Necessary Tools and Parts

Before starting the replacement, ensure you have the following items on hand:

• New rear brake rotors and pads
• Caliper hanger hooks
• Jack and jack stands
• Lug wrench
• Socket set (typically 14mm and 17mm)
• Brake cleaner
• Torque wrench
• Brake grease

Practical Tip

Purchase parts from reputable sources, such as the links provided in the video description, to ensure quality and compatibility.

Step 2: Prepare the Vehicle

1. Park the vehicle on a flat surface and engage the parking brake.
2. Loosen the lug nuts on the rear wheels slightly (do not remove them yet).
3. Use the jack to lift the vehicle and secure it with jack stands for safety.

Step 3: Remove the Rear Wheels

1. Fully remove the loosened lug nuts.
2. Take off the rear wheels and set them aside.

Step 4: Remove the Caliper

1. Locate the caliper bolts, typically found on the back of the caliper.
2. Use the appropriate socket to remove these bolts.
3. Carefully slide the caliper off the rotor.
4. Use caliper hanger hooks to secure the caliper and avoid stressing the brake line.

Step 5: Remove the Old Brake Pads

1. Take out the old brake pads from the caliper bracket.
2. If equipped, remove the clips holding the pads in place.

Step 6: Replace the Rotor

1. Locate the rotor retaining screws (if applicable) and remove them.
2. Slide the old rotor off the hub.
3. Clean the hub surface with brake cleaner to remove any debris.
4. Install the new rotor by sliding it onto the hub.

Step 7: Install New Brake Pads

1. Apply brake grease to the back of the new brake pads to reduce noise.
2. Insert the new brake pads into the caliper bracket.
3. Ensure they are secured properly.

Step 8: Reinstall the Caliper

1. Carefully slide the caliper over the new pads.
2. Reinstall the caliper bolts and tighten them to the manufacturer's specifications.

Step 9: Reattach the Wheel

1. Place the wheel back onto the hub.
2. Hand-tighten the lug nuts before lowering the vehicle.
3. Lower the vehicle and then fully tighten the lug nuts in a crisscross pattern to ensure even pressure.

Step 10: Test the Brakes

1. Before driving, pump the brake pedal a few times to ensure the pads seat properly against the rotor.
2. Check for any unusual noises or issues before taking the vehicle on the road.

Conclusion

You have successfully replaced the rear brake rotor pads on your Honda Ridgeline. Regular maintenance of your braking system is crucial for safety and performance. If you encounter any issues or have questions, consider consulting a professional mechanic. Remember to dispose of old brake components responsibly and keep your tools organized for future maintenance tasks.