Ford Fiesta Как заменить корпус флип ключа / Как снять чип иммобилайзера, не сломав корпус

Introduction

This tutorial provides a comprehensive guide on how to replace the flip key case for a Ford Fiesta. You'll learn how to safely disassemble the key fob, remove the immobilizer chip, and transfer it to the new case without damaging any components.

Step 1: Gather Necessary Tools

Before starting the replacement process, ensure you have the following tools on hand:

• Flathead screwdriver
• Phillips screwdriver
• Tweezers
• New flip key case
• Small container for small parts

Step 2: Disassemble the Key Fob

To access the internal components of the key fob, follow these steps:

1. Locate the seam on the key fob where the two halves join.
2. Insert the flathead screwdriver gently into the seam and twist slightly to pry open the case.
3. Carefully separate the halves of the fob, making sure not to damage the internal components.

Step 3: Remove the Battery

Once the key fob is open:

1. Identify the battery within the fob.
2. Use the tweezers to carefully lift the battery out of its compartment.
3. Place the battery in a safe location to prevent it from getting lost.

Step 4: Extract the Immobilizer Chip

This step requires precision to avoid damaging the chip:

1. Locate the immobilizer chip in the key fob.
2. Use the tweezers to gently lift the chip out of its housing. Be cautious as it is delicate.
3. Place the chip in your small container to keep it safe.

Step 5: Prepare the New Key Case

Before transferring components, ensure your new case is ready:

1. Open the new flip key case and inspect its compartments.
2. Ensure the battery compartment and immobilizer chip housing are clear of debris.

Step 6: Transfer Components to New Case

Now, move the components to the new key case:

1. Insert the immobilizer chip into its designated slot in the new key case.
2. Place the battery back into its compartment, ensuring the polarity matches the original orientation.

Step 7: Reassemble the Key Fob

You are now ready to close the key fob:

1. Align the two halves of the new key case.
2. Press down firmly until you hear a click, indicating the case is securely closed.

Conclusion

You have successfully replaced the flip key case for your Ford Fiesta. Always double-check that all components are securely in place before using the key. If you encounter any issues, refer back to this guide, and consider consulting a professional for assistance. Enjoy your newly refurbished key fob!