Steelcase Think - How To Replace The Cylinder

Here is a step-by-step tutorial on how to replace the cylinder in a Steelcase Think V2 chair based on the closed captions of the provided YouTube video:

1. Extend the Cylinder: Extend the cylinder to the highest position using the seat height lever on the chair.

2. Prepare the Chair: Lean the chair on its seat and back on a soft furniture pad to avoid any damage during the replacement process.

3. Remove the Chair Base: Carefully hit the cylinder with a mallet while pulling on the base of the chair to detach the chair base from the cylinder. For stool chairs, position the chair upside down to access the foot ring.

4. Detach the Foot Ring: Twist the foot ring counterclockwise and lift it off the cylinder to expose the connection point.

5. Secure the Cylinder Removal Tool: Attach the cylinder removal tool to the cylinder where it connects to the control mechanism. Pull the elastic band around the cylinder and attach it to the pin of the removal tool.

6. Apply Force: Apply lifting force to the cylinder column with one hand while using a hammer or mallet in the other hand to give the removal tool several solid hits on the flat area. This action should help separate the cylinder from the control mechanism.

7. Troubleshooting: If the cylinder does not separate from the control, apply WD-40 where the cylinder is embedded into the control. Wait for 20 minutes and then repeat the removal procedure.

8. Install the New Cylinder: Once the old cylinder is removed, install the new cylinder and base securely in place.

9. Test the Chair: Sit in the Think chair to ensure the replacement cylinder is securely in place and functioning correctly.

10. Finalize the Replacement: Congratulations! You have successfully replaced the cylinder in your Steelcase Think V2 chair. You are now ready to use your Think V2 chair with the new cylinder installed.

Remember to follow these steps carefully to ensure a successful cylinder replacement in your Steelcase Think V2 chair.