WOW!MENGUBAH KARDUS JADI KIPAS ANGIN UNIK BERFAEDAH-Bisa swing kiri kanan
Table of Contents
Introduction
In this tutorial, you will learn how to transform a cardboard box into a unique and functional fan that can swing from side to side. This DIY project is not only a creative way to recycle materials, but it also provides a practical solution for staying cool. We will use easy-to-obtain materials and simple tools to create a fan that is both effective and fun to make.
Step 1: Gather Your Materials
Start by collecting all the necessary materials for your project:
- Cardboard box
- High RPM motor (Dinamo)
- Mini gearbox motor (Dinamo Gear box mini)
- On/Off switch
- 9V battery
- Battery holder/socket
- Used tissue roll
- Ice cream sticks
Tip: Make sure your motors are functional and check the battery's charge before starting the assembly.
Step 2: Prepare the Cardboard Base
Next, you will create the base for your fan:
- Cut the cardboard into a square or rectangle that will serve as the fan's base.
- Ensure the size is sufficient to hold the motor and other components securely.
- Cut a circular piece of cardboard to act as the fan blade.
Practical Advice: Use a ruler to measure and cut straight edges for a more professional look.
Step 3: Assemble the Motor
Now, you will attach the motor to the base:
- Secure the high RPM motor in the center of the cardboard base using glue or tape.
- Attach the mini gearbox motor adjacent to the first motor to enable the swinging motion.
- Connect the wiring from the motors to the On/Off switch.
Common Pitfall: Ensure that the motors are mounted tightly to prevent any movement that could disrupt functionality.
Step 4: Connect the Power Supply
It’s time to set up the power source for your fan:
- Connect the battery holder to the On/Off switch.
- Insert the 9V battery into the holder.
- Make sure all connections are secure, and double-check the polarity of the battery.
Tip: Use electrical tape to insulate any exposed wires to prevent short circuits.
Step 5: Create the Fan Blades
Now you will construct the fan blades:
- Take the circular cardboard piece and cut it to your desired blade shape.
- Attach the blades to the high RPM motor shaft securely.
- Optionally, use ice cream sticks to add more stability to the blades.
Practical Advice: Balance the blades by ensuring they are evenly spaced around the center.
Step 6: Final Assembly and Testing
Finish up by assembling all parts and testing your fan:
- Double-check all connections and ensure everything is secured.
- Turn on the On/Off switch to test the fan.
- Observe the swinging motion and adjust the gearbox if necessary.
Common Pitfall: If the fan does not swing or operate properly, recheck all wiring and motor connections.
Conclusion
Congratulations! You have successfully transformed a cardboard box into a functional fan that can swing from side to side. This project not only showcases your creativity but also provides a great way to repurpose materials.
Next Steps
- Consider painting or decorating your fan for a personal touch.
- Experiment with different blade designs or motor configurations to enhance performance.
Enjoy your new DIY fan!