PROSES PENARIKAN TALI TOWER SUTET MENGUNAKAN DRONE|ketapang kalbar

Introduction

This tutorial provides a step-by-step guide on how to use a drone to pull cables between towers, specifically in a forested area. The process involves navigating challenges such as distance and terrain, making it relevant for those involved in drone operations for utility projects or similar tasks.

Step 1: Preparing the Drone for Cable Pulling

• Select the Right Drone: Ensure your drone is suited for heavy lifting and has adequate battery life for the distance of around 500 meters.
• Check Equipment: Inspect the drone's camera, propellers, and battery. Make sure the drone can carry the necessary weight of the cable.
• Plan Your Flight Path: Use a mapping tool to visualize the route between the two towers, taking note of obstacles such as trees or other structures.

Step 2: Setting Up the Cable System

• Gather Materials: You will need:
  • Strong cable suitable for the distance and purpose.
  • A method to attach the cable to the drone securely.
• Attach the Cable:
  • Securely fasten one end of the cable to the drone.
  • Ensure the attachment is tight enough to prevent detachment during flight.

Step 3: Conducting a Safety Check

• Perform a Pre-Flight Check:
  • Verify all systems are operational.
  • Ensure the environment is safe for flying (no people or animals in the vicinity).
• Test Flight: Conduct a short test flight to confirm the drone's stability and weight capacity with the attached cable.

Step 4: Executing the Cable Pull

• Launch the Drone:
  • Take off slowly, allowing the drone to gain altitude and maintain stability.
• Navigate to the Second Tower:
  • Fly the drone along the planned path, keeping an eye on the cable to ensure it is not snagged or caught on obstacles.
• Land Safely at the Destination:
  • Gently lower the drone at the second tower location.

Step 5: Securing the Cable

• Detach the Cable: Carefully remove the cable from the drone once it has landed.
• Secure the Cable to the Tower:
  • Use appropriate methods to tie down the cable at the second tower, ensuring it is tight and secure.

Conclusion

Using a drone to pull cables between towers is an efficient method that can save time and reduce manual labor. Key takeaways include proper preparation of the drone, ensuring safety checks, and securely managing the cable during the flight. For future projects, consider documenting the process and any challenges faced to improve efficiency and safety in subsequent operations.