Mustang KEE Auto Top Convertible Top With Plastic Window One-Piece Vinyl 1994-2004 Installation

Introduction

This tutorial provides a step-by-step guide on installing the KEE Auto Top One-Piece Vinyl Convertible Top with a Plastic Window on a 1994-2004 Mustang. Replacing your convertible top can enhance the appearance and functionality of your vehicle, especially for summer drives. This installation process is designed to be more straightforward compared to traditional methods, making it accessible for the average Mustang enthusiast.

Step 1: Gather Your Tools and Materials

Before starting the installation, ensure you have all necessary tools and materials ready.

• Tools Required:

  • Screwdriver set
  • Ratchet and socket set
  • Trim removal tool
  • Utility knife
  • Adhesive spray
  • Measuring tape

• Materials:

  • KEE Auto Top One-Piece Vinyl Convertible Top
  • Replacement weather stripping (if needed)

Step 2: Prepare the Vehicle

Preparation is key to a successful installation.

• Park the Mustang on a flat surface.
• Ensure the convertible top is fully down.
• Remove any existing top components:
  • Use a trim removal tool to detach the old top from the clips and fasteners.
  • Carefully cut away the old top with a utility knife, avoiding damage to the frame.

Step 3: Install the New Convertible Top

Follow these steps to fit the new top securely.

• Lay the new top over the frame:

  • Align the top with the rear of the vehicle, ensuring it is centered.

• Attach the front of the top:

  • Secure it using the provided clips and fasteners.
  • Make sure the top is taut but not overstretched.

• Attach the sides:

  • Adjust the sides of the top and use adhesive spray to secure any areas that require additional hold.
  • Ensure there are no wrinkles or bulges in the fabric.

Step 4: Secure the Rear Window

Installing the rear window is a crucial part of the process.

• Ensure that the plastic window is properly aligned with the frame.
• Use the provided hardware to attach the window securely.
• Check for any gaps or misalignments and adjust as necessary.

Step 5: Final Adjustments and Checks

Once the top is installed, perform a thorough inspection.

• Check all fasteners and clips to ensure they are secure.
• Inspect the entire top for proper fit and alignment.
• Test the convertible top mechanism to confirm it operates smoothly.

Conclusion

Installing a KEE Auto Top One-Piece Vinyl Convertible Top on your Mustang can be a rewarding project that enhances your vehicle's look and functionality. Remember to gather all necessary tools beforehand and take your time during installation for the best results. If you encounter any issues, don’t hesitate to consult additional resources or seek professional help. Enjoy your newly installed convertible top and the open road!