2017+ Honda CR-V Oil Change How To -Jonny DIY

Introduction

This tutorial provides a step-by-step guide on how to perform an oil change for 2017 and newer Honda CR-V models, including both the 2.4L and 1.5L turbo engines. Additionally, you'll learn how to reset the oil maintenance light. Regular oil changes are essential for maintaining engine health, and this guide will help you do it safely and effectively.

Step 1: Gather Your Tools and Supplies

Before starting your oil change, collect the necessary tools and materials:

• Engine Oil: 5 quarts of 0W-20 full synthetic oil
• Oil Filter: Mobil 1 M1-110A or WIX equivalent
• Tools:
  • 170 Piece Mechanics Tool Set
  • Oil Drain Pan
  • Funnel
  • Oil Filter Pliers
  • Car Ramps or Jack Stands
• Safety Gear:
  • Safety glasses
  • Nitrile disposable gloves or mechanics gloves

Practical Tips

• Ensure you have everything on hand to avoid interruptions.
• Work in a well-ventilated area and wear appropriate safety gear.

Step 2: Prepare the Vehicle

1. Park on a Level Surface: Ensure your vehicle is on a flat surface for stability.
2. Raise the Vehicle: Use car ramps or jack stands to elevate the front of the CR-V. This allows better access to the oil drain plug.
3. Secure the Car: Engage the parking brake to prevent any movement.

Common Pitfalls

• Avoid working on a hot engine; let the vehicle cool down to prevent burns.

Step 3: Drain the Old Oil

1. Locate the Oil Drain Plug: Underneath the vehicle, find the oil drain plug at the bottom of the oil pan.
2. Remove the Drain Plug:
   • Use the appropriate socket or wrench to loosen and remove the drain plug.
   • Allow the old oil to completely drain into the pan.
3. Replace the Drain Plug: Once drained, clean the plug and reinstall it securely.

Practical Tips

• Dispose of the old oil properly at a recycling center.

Step 4: Replace the Oil Filter

1. Locate the Oil Filter: Find the oil filter near the engine.
2. Remove the Old Oil Filter:
   • Use oil filter pliers to loosen and remove the filter.
   • Be prepared for some oil to spill from the old filter.
3. Install the New Oil Filter:
   • Apply a small amount of new oil to the rubber gasket of the new filter.
   • Screw on the new filter by hand until snug; avoid over-tightening.

Common Pitfalls

• Ensure the old filter gasket is removed to prevent leaks.

Step 5: Add New Oil

1. Open the Oil Filler Cap: Remove the cap on top of the engine.
2. Pour in New Oil:
   • Using a funnel, pour in 5 quarts of new 0W-20 oil.
3. Check Oil Level:
   • Replace the oil filler cap after adding oil.
   • Start the engine and let it run for a few minutes, then turn it off.
   • Wait a minute, then check the dipstick level and add more oil if necessary.

Practical Tips

• Always check for leaks around the oil filter and drain plug after adding oil.

Step 6: Reset the Oil Maintenance Light

1. Start the Vehicle: Turn on the ignition without starting the engine.
2. Access the Menu:
   • Use the buttons on the steering wheel to navigate to the settings menu.
3. Reset the Oil Life:
   • Select the option for resetting the oil maintenance light.
   • Confirm the reset action.

Common Pitfalls

• Ensure the vehicle is in the correct mode to access the maintenance settings.

Conclusion

Performing an oil change on your Honda CR-V is a straightforward task that can save you money and keep your engine running smoothly. Remember to gather all necessary tools, follow safety precautions, and dispose of old oil responsibly. With these steps, you can maintain your vehicle's health and reset the oil maintenance light with confidence. Consider scheduling regular oil changes every 5,000 to 7,500 miles to ensure optimal performance.