DEEPCOOL GAMMAXX AG400 | Step by Step CPU Swap + Cooler Install | Intel LGA 115X/1200/1700 Socket

Introduction

This tutorial provides a detailed guide for swapping a CPU and installing the DEEPCOOL GAMMAXX AG400 cooler on Intel LGA 115X, 1200, and 1700 sockets. Whether you are upgrading your CPU or improving your cooling solution, this step-by-step process will ensure you do it correctly and efficiently.

Step 1: Prepare Your Workspace

• Ensure you have a clean, static-free workspace.
• Gather necessary tools:
  • Phillips screwdriver
  • Thermal paste (if not pre-applied)
  • Anti-static wrist strap (recommended)

Step 2: Remove the Old CPU Cooler

• Power down the computer and unplug all cables.
• Open the case and locate the CPU cooler.
• Disconnect the cooler’s power cable from the motherboard.
• Unscrew or unclip the cooler from the CPU socket:
  • Follow the manufacturer’s instructions specific to your cooler.
• Gently twist and pull the cooler off to avoid damaging the CPU.

Step 3: Remove the Old CPU

• Release the CPU socket lever:
  • Push it down and away from the socket.
• Carefully lift the CPU out of the socket:
  • Avoid touching the pins on the bottom of the CPU.

Step 4: Install the New CPU

• Align the new CPU with the socket:
  • Match the notches on the CPU with the socket.
• Gently place the CPU into the socket.
• Secure it by lowering the lever back into place.

Step 5: Apply Thermal Paste

• If your cooler does not have pre-applied thermal paste, apply a small pea-sized amount of thermal paste to the center of the CPU.
• Avoid spreading it; the pressure from the cooler will distribute it evenly.

Step 6: Install the DEEPCOOL GAMMAXX AG400 Cooler

• Position the cooler over the CPU, aligning it with the mounting brackets.
• Secure the cooler in place:
  • Tighten the screws evenly in a crisscross pattern to ensure even pressure.
• Connect the cooler’s power cable to the motherboard.

Step 7: Reassemble the Computer

• Ensure all connections are secure.
• Close the case and reconnect all cables.
• Power on the computer and check that the cooler is functioning properly:
  • Monitor temperatures in BIOS or with software.

Conclusion

You have successfully swapped your CPU and installed the DEEPCOOL GAMMAXX AG400 cooler. Remember to monitor your system’s temperatures to ensure optimal performance. For AMD users, check out the linked tutorial for AM4/AM5 installations. Happy computing!