How To Replace Windshield Washer Pump Motor [UNIVERSAL]

Introduction

In this tutorial, you will learn how to replace the windshield washer pump motor in your vehicle. This guide will walk you through each step of the process, making it simple and straightforward. While the example used is a 2005 Toyota Camry, the principles apply to most car models.

Step 1: Diagnose the Issue

Before replacing the pump motor, ensure that it is actually the source of the problem.

• Pull the wiper lever to see if the motor activates.
• Check if there is water in the washer fluid tank.
• If the wipers work but water does not spray, the pump motor may be faulty.

Step 2: Locate the Pump Motor

The windshield washer pump motor is typically located on the passenger side of the vehicle.

• Remove the tire on the passenger side if necessary for better access.
• Identify the motor, which is usually a black object.

Step 3: Identify Connections

Before removing the motor, take note of the connections.

• Inlet: Located at the front section of the motor.
• Outlet: Found on the left side of the motor.
• Motor Connection: Located on top of the motor.

This will help ensure you reconnect the new motor correctly.

Step 4: Remove the Old Motor

Carefully detach the old motor from its position.

• Disconnect the inlet and outlet pipes.
• Unplug the electrical connection.
• Remove any screws or fasteners holding the motor in place.

Step 5: Install the New Motor

Now it's time to install the new windshield washer pump motor.

• Position the new motor in place.
• Reconnect the inlet and outlet pipes, ensuring proper placement:
  • Inlet should connect to the smaller washer.
  • Outlet connects to the small pipe.
• Plug in the electrical connection securely.

Step 6: Test for Leaks

Before testing the functionality, ensure there are no leaks.

• Fill the washer fluid tank with water or washer fluid.
• Observe all connections for any signs of leakage.

Step 7: Check Functionality

Once you confirm there are no leaks, test the new pump motor.

• Pull the wiper lever to activate the washer pump.
• Ensure that the water sprays correctly.

Conclusion

You've successfully replaced your windshield washer pump motor! Make sure to check for any leaks and confirm that it's functioning properly. This task not only saves you money on repairs but also enhances your DIY skills. For further guidance, consider exploring related tutorials on maintaining your vehicle. Happy driving!